Manual - Pixord

More documents

Recommendations

Info

5. Ensure the power adapter specification matches the power system (110V or 220V). Connectthe adapter to the outlet.6. Check both LEDs (Power/Network); ensure they are light on after the steps above.Follow the same steps as connecting P1500 video server except step 3, to perform the P500connections.Physical connection of P500 Camera2. Software InstallationThe following software is necessary for the proper display and use of the P500/1500 from the Web site.- 7 -
The software will be taken from the Software Package CD.IP InstallerThe IP Installer is used to locate and configure network cameras and video servers on the LAN. Thisutility is useful for conveniently configuring the network settings of the device, or for finding a device oncethe network settings have been modified.To install the IP Installer, from the Software Package CD UI, select IP installer, then follow the on screeninstructions.Component InstallerThe ActiveX component is used by our devices for video display and device configuration. Usually, whenyou connect to the P500/1500 via IE browser, the ActiveX component will be installed automatically. If thecomponents can not be installed, install this software from the Software Package CD.XVID CodecAn MPEG-4 codec is applied for displaying the video stream and playing the recoded AVI files. If thevideo stream can’t be displayed or the recorded AVI files can be play on PC, install this software from theSoftware Package CD.VLCThough not necessary, this can be used for viewing the streaming without a Web browser.- 8 -
Page 1 and 2: PiXORDDual Streaming Network Camera
Page 3 and 4: Chapter 1Introduction1. What is PiX
Page 6 and 7: 2. P500 Network CameraCOM/ GPIOLAN
Page 10 and 11: 3. Network ConfigurationIP Installe
Page 12 and 13: 5. After filling in the properties,
Page 14 and 15: Chapter 4Using the Web UIStart your
Page 16 and 17: Click “Deinterlace” to expend t
Page 18 and 19: 2. PlaybackTo play back the recorde
Page 20 and 21: Playback ScreenController’s ViewO
Page 22 and 23: Remote Record Playback StreamThe pl
Page 24 and 25: Chapter 5Configure the Settings wit
Page 26 and 27: Stream 1:- Resolution: Streaming /
Page 28 and 29: PTZ Setup- PTZ Setting:Remove: No d
Page 30 and 31: 4. Event SetupGeneral Setup- Event
Page 32 and 33: GPIN trigger: Apply the sensor rela
Page 34 and 35: Motion Area SetupMove mouse cursor
Page 36 and 37: 5. System SetupGeneral Setup- Unit
Page 38 and 39: User Password Setup (Available for
Page 40 and 41: System Commands (Available for Admi
Page 42 and 43: System AudioSystem audio enable and
Page 44 and 45: DDNS SetupDynamic DNS Settings 1:-
Page 46 and 47: Email Setup- Email via SMTP: Set to
Page 48 and 49: PPPoE Setup- PPPoE enable: Enable/d
Page 50 and 51: Storage Record Setup- Start Schedul
Page 52 and 53: 2 x USB 2.0 Host ports for external
Page 54 and 55: Appendix BThe Mini Din ConnectorThe
Page 56 and 57: Appendix CFAQ1. How can I set facto
Page 58 and 59:
2. How to change the TV standard (P
Page 60 and 61:
Note: Flash products can become dam
Page 62 and 63:
In Temporary Internet files, click
show all

Manual - Pixord

Create successful ePaper yourself

Delete template?

Save as template?