Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Appendix CFAQ1. How can I set factory default?ANS:1. Unplug the power jack to turn off the power of P500/1500.2. Insert a pin into the reset hole as circled with red in the below figures. Sense a button and keepit pressed until instructed to release.3. Plug in the power jack to turn on P500/1500, in about 20 seconds the network LED circled inblue will be flashing4. Release the button (remove the pin from the reset hole).5. The P500/1500 should now be back to factory default. Have an access to the device bychanging to the attempt IP address from the default 192.168.0.200.P500P150055
Change language