Manual - Pixord

More documents

Recommendations

Info

System AudioSystem audio enable and adjustment: Mute check box for silence, Volume for the sound volumeadjustment.41
6. Network SetupGeneral Setup- Ethernet Mode: If using static IP, set to “Static” and then setup the following settings. If there is a DHCPserver on the network, set to “DHCP”, the device will get the following settings from the serverautomatically.- IP Address: Set the IP address of the device.- Subnet Mask: Set the subnet mask.- Gateway: Set the IP address of the gateway on the network.- MAC Address: Shows the MAC address of the device.- HTTPS: on/off the HTTPS option.- HTTP Port: Change the port if necessary.- RTSP Port: Change the port if necessary. Default port is recommended.- RTSP Start: Change the port if necessary. Default port is recommended.- RTSP End: Change the port if necessary. Default port is recommended.- DNS1 / DNS2: Set the IP address of the DNS server.- Apply: Confirm the settings.42
Page 1 and 2: PiXORDDual Streaming Network Camera
Page 3 and 4: Chapter 1Introduction1. What is PiX
Page 6 and 7: 2. P500 Network CameraCOM/ GPIOLAN
Page 8 and 9: 5. Ensure the power adapter specifi
Page 10 and 11: 3. Network ConfigurationIP Installe
Page 12 and 13: 5. After filling in the properties,
Page 14 and 15: Chapter 4Using the Web UIStart your
Page 16 and 17: Click “Deinterlace” to expend t
Page 18 and 19: 2. PlaybackTo play back the recorde
Page 20 and 21: Playback ScreenController’s ViewO
Page 22 and 23: Remote Record Playback StreamThe pl
Page 24 and 25: Chapter 5Configure the Settings wit
Page 26 and 27: Stream 1:- Resolution: Streaming /
Page 28 and 29: PTZ Setup- PTZ Setting:Remove: No d
Page 30 and 31: 4. Event SetupGeneral Setup- Event
Page 32 and 33: GPIN trigger: Apply the sensor rela
Page 34 and 35: Motion Area SetupMove mouse cursor
Page 36 and 37: 5. System SetupGeneral Setup- Unit
Page 38 and 39: User Password Setup (Available for
Page 40 and 41: System Commands (Available for Admi
Page 44 and 45: DDNS SetupDynamic DNS Settings 1:-
Page 46 and 47: Email Setup- Email via SMTP: Set to
Page 48 and 49: PPPoE Setup- PPPoE enable: Enable/d
Page 50 and 51: Storage Record Setup- Start Schedul
Page 52 and 53: 2 x USB 2.0 Host ports for external
Page 54 and 55: Appendix BThe Mini Din ConnectorThe
Page 56 and 57: Appendix CFAQ1. How can I set facto
Page 58 and 59: 2. How to change the TV standard (P
Page 60 and 61: Note: Flash products can become dam
Page 62 and 63: In Temporary Internet files, click

Manual - Pixord

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?