download

Chapter 3Targetrmconfigrmconfig-recursiveconfig-conditionalfetch-listfetch-recurisvefetch-recursive-listmissingcleandistcleandeinstallpackagepackage-recursivesearchquicksearchDescriptionRemoves any configuration saved by the config option.Runs rmconfig for the port and its dependencies.Runs config only if the port is not already configured(save the configured that does not exist).Shows a list of files that needs to be downloaded for theport.Runs fetch for the port and all dependencies.Runs fetch-list for the port and its dependencies.Prints a list of missing dependencies that should beinstalled.Cleans up the work directory.Cleans the downloaded files for the port.Removes and installs port and unregisters it from thepackages databaseCreates a package tarball from the build port.Creates a package of the port and all its dependencies.Finds the ports based on specific criteria.Runs search but shows reduced output (only portnameand path is shown).Once you find the port you want to install, you should change the current directoryto the ports directory and run the make install command:# cd /usr/ports/net-mgmt/sjitter/# make install=> sjitter-0.14b.tgz doesn't seem to exist in /usr/ports/distfiles/.=> Attempting to fetch from http://www.alcasat.net/dev/sjittersjitter-0.14b.tgz100% of 8070 B 5910 Bps===> Extracting for sjitter-0.14b=> MD5 Checksum OK for sjitter-0.14b.tgz.=> SHA256 Checksum OK for sjitter-0.14b.tgz.===> Patching for sjitter-0.14b===> sjitter-0.14b depends on executable in : gmake - found===> Configuring for sjitter-0.14b===> Building for sjitter-0.14b[…][ 53 ]