GP1670F_1870F Operator's Manual - Furuno USA

9. MEMORY CARD OPERATIONSThis system uses SD and SDHC cards to store points, routes, tracks, settings, andscreenshots. The system accepts cards of up to 32GB in size.9.1 The Memory Card ScreenOpen the [GENERAL] menu and select [MEMORY CARD] to show the [MEMORYCARD] screen. This is where all phases of memory card operations start.Points&Routes Tracks Screenshots DefaultsName Points Routes Date TimeFILE0001 7 2 04-02-12 01:20PM9.2 How to Initialize SD CardsBefore you can use an SD card, the card must be initialized for use with the system.You can initialize cards that contain data, in which case all information on the card iserased.1. Open the SD card cover and insert a blank SD card in the SD card slot. Close thecover.2. Open the [GENERAL] menu and select [MEMORY CARD].3. Push the ENT key to give control to the RotoKey functions (at the bottom of thescreen). Rotate the RotoKey TM to select [Initialize] then push the key. (If the cardis not a storage card, the message "It is not a user card." appears.) The message"Delete all files from SD card. Are you sure?" appears.4. Select [YES] then push the ENT key. When the initialization is completed, themessage "SD Card was successfully initialized." appears. Do not remove the carduntil the initialization is completed.5. Press the ESC/MENU key to erase the message.9-1