GP1670F_1870F Operator's Manual - Furuno USA

3. POINTS3.2.2 How to enter a point at the cursor position1. Operate the CursorPad to put the cursor where desired then press the POINTS/GOTO key.The “point” pop-up appears and shows point name, latitude and longitude positionof the point, and distance and bearing to the point. No further operation is necessaryto save the point under the assigned point name and the default symbol andcolor. To save the point under different conditions, go to step 2.SymbolCursor position inlatitude and longitudeDistance to pointPT0001143°59.2157'N135°16.6498'EDST NM BRG T10.5 185°Point nameBearing to point2. Press the POINTS/GOTO key again, and a window that looks something like theone shown below appears.3. By default, the [Name] field shows the youngest empty point number. You canchange the name, using the CursorPad.4. The [Position] field shows the position at the time the point was entered. If necessary,you can change the position, using the CursorPad.5. Select [Shape] to change the icon, from among the choices shown below.6. Select [Color] to change the color of the icon, from among the choices shown below.7. [Show] selects the visibility level for the point (icon).[Show]: Show the icon and the point name.3-2