GP1670F_1870F Operator's Manual - Furuno USA

5. NAVIGATION5.2 How to Navigate to a Saved PointThere are two methods by which to navigate to a saved point: select the point on thescreen and select the point from the [Points List].5.2.1 How to navigate to a saved point selected on the screenPut the cursor on the saved point then press the ENT key. Select [GOTO] then pressthe ENT key. See the description on page 5-1 for the meaning of the symbols andlines and the sequence of events in navigation to a point.Arrival area (red)Point(yellow bydefault)FURUNOXTE alarm line(red)Ship iconPointnameNavigation line(red)5.2.2 How to navigate to a point selected from the Points List1. Open the [PLOTTER] menu and select [POINTS] to show the [Points List].2. Select a point then press the ENT key to show the context-sensitive menu.3. Select [GOTO] then press the ENT key.5.3 How to Select a Route for NavigationThere are two methods to select a route for navigation: select the route on the screenand select the route from the [Routes List].5.3.1 On-screen routePut the cursor on any route leg of the route then press the ENT key to show the context-sensitivemenu. Select [GOTO] then press the ENT key.Note: If you are currently navigating a route, the message "Destination is alreadypresent. Stop the navigation." appears. Select [YES] to stop navigation on the currentroute and switch to the newly selected route, or select [NO] to continue navigation withthe current route.After you select a route the following occurs:5-2