GP1670F_1870F Operator's Manual - Furuno USA

5. NAVIGATION5.4 Functions Available When You Follow a Route5.4.1 Restart navigationWhen you follow a route, you can restartthe navigation to the next point on theroute from current location.When you steer to keep away from an obstructionor your boat drifts, you go offcourse, like shown with Line 1 in the figure.If you do not need to return to theoriginal course, you can go to the desiredpoint from the current position as shownin Line 2 in the figure.Original courseObstacle Line 1 Line 2Put the cursor on a leg in the route then press the ENT key to show the context-sensitivemenu. Select [RESTART] then press the ENT key. The route start positionmoves to the current position and the XTE is reset to zero.5.4.2 Follow a route in reverse orderYou can follow the route points of a route in reverse order. This feature is useful whenyou want to retrace a route from the end to the beginning.Put the cursor on a leg in the route then press the ENT key to show the context-sensitivemenu. Select [REVERSE] then press the ENT key. The arrows on the route nowpoint in the opposite direction.5.4.3 Stop following a routePut the cursor on a leg in a route then press the ENT key to show the context-sensitivemenu. Select [STOP] then press the ENT key. The arrival area, XTE alarm lines areerased and the color of the legs connecting the route points of the route changes toblue.5.4.4 Skip a leg in a routeWhen you don’t need to follow all route legs in a route you can skip an unnecessaryleg. (Multiple legs can be skipped) After you select the leg to skip, the route is redrawn,with the skipped leg removed. Put the cursor on the route point to skip thenpress the ENT key to show the context-sensitive menu. Select [SKIP] then press theENT key.5-4