GP1670F_1870F Operator's Manual - Furuno USA

4. ROUTES4.9 How to Display a Route on the ScreenOpen the [PLOTTER] menu and select [ROUTES] to show the [Routes List]. Select aroute then press the ENT key. Select [PLOT] from the context-sensitive menu thenpress the ENT key.4.10 How to Connect Two RoutesYou can connect two routes from the [Routes List]. In the example below route 1 isconnected to route 2.1. Open the [PLOTTER] menu and select [ROUTES] to show the [Routes List].2. Select the starting route then press the ENT key.3. Select [EDIT] from the context-sensitive menu then press the ENT key.4. Use the RotoKey TM to select the [Connect] button (at the bottom of the screen)then press the RotoKey TM to display the routes list (at right half of the screen).5. Select route 2 then press the ENT key.The joined route is saved under the name of route 1. If the total number of points exceeds50, the excess is removed from the end of the route.4.11 Simple Route InformationYou can find simple route information for a route by putting the cursor on a leg of theroute. The name of the route and the date of its creation are shown.NameCommentRT000112:20PM 03-16-124-11