User Manual - MBS Survey Software Ltd.

Reset - returning the instrument tothe factory settings ( )The instrument has a RESET function. When youselect the menu function RESET and confirm, theinstrument defaults to the factory settings.A reset returns the following values to their factorysettings:• Reference (rear)• Display illumination (ON)• Beep (ON)• Unit (m(mm))• Stack and memory are erasedAll customised settings and stored values arealsolost.OperationSwitching on and offSwitches on the instrument and laser. Thedisplay shows the battery symbol until thenext button is pressed.Pressing this button for longer switchesthe instrument off.The instrument switches off automaticallyafter six minutes of inactivity.CLEAR buttonThe last action is cancelled. While makingarea or volume measurements, each single measurementcan be deleted and remeasured in series.Reference settingThe default reference setting is from the rear of theinstrument.Press this button to take the next measurementfrom the front edge . A special beep sounds wheneverthe reference setting is changed.After a measurement the reference returns automaticallyto the default setting (rear reference).Press this button for longer the front referenceis set permanently.Press this button, the rear reference is set again.DGBFIEPNLDKSNFINJCNROKPLHRUSCZLeica DISTO D3a BT 776750 gb11 Operation