User Manual - MBS Survey Software Ltd.

DGBFIEPNLDKSNFINJCNROKPLHRUSCZThe direction keysEight direction keys (identified by a small arrow nearthe key) on the operator's keypad are used tomanoeuvre the cursor. The direction keys becomeactive when you switch to the second level (bypressing the key). The distance measuring key isactive in both levels. The functionality of the directionkeys depends on the software used.Transmitting the measurementIf your software supports the direction keys use themto select the appropriate position for the cursor.Press the button briefly to transfer the valuefrom the summary row to the pocket PC / PC.Press the botton long to transfer all values fromthe display.For further details please consult your manual for thesoftware used.During data transmissionIf the data is not confirmed as being successfullyreceived by the Pocket PC/ PC then no new measurementcan be processed. The Info code "240" appearsin the display if no data transmission has taken placeafter 2 seconds. Press the - key and repeatthe measurement and then transmit it.The free software supplied is designed toprovide the user with basic functionality. LeicaGeosystems provides no warranty for this free softwareand offers no support for it. Leica Geosystemsaccepts no liability whatsoever arising from the useof the free software and is not obliged to providecorrections nor to develop updates or upgrades.You can find numerous commercial vendors of softwarefor a wide range of applications on ourhomepage.AppendixMessage codesAll message codes are displayed with either"Error". The following errors can be corrected:Cause156 Transverse tiltgreater than 10°160 Main tilt direction,angle too high(> 45°)orRemedyHold the instrumentwithout any transversetiltMeasure angle up tomax. ± 45°204 Calculation error Repeat procedure240 Data transfer error Repeat procedureAppendix20Leica DISTO D3a BT 776750 gb