User Manual - MBS Survey Software Ltd.

More documents

Recommendations

Info

DGBFIEPNLDKSNFINJCNROKPLHRUSCZdefined value (a) is automatically adopted). Value (b)can be entered using and .The defined value (b) is confirmed with thebutton.Pressing the button starts the laser measurement.The display shows required stake out distancein the summary line between the stake out point(first a and then b) and the instrument (rear reference).If the DISTO is then moved slowly along the stakeout line the displayed distance decreases. The instrumentstarts to beep at a distance of 0.1m from thenext stake out point.abThe arrows in the display indicate in which directionthe DISTO needs to be moved in order tobachieve the defined distance (either a or b). As soonas the stake out point is reached the beep changes.The function can be stopped at any time by pressingthe button.Indirect measurementThe instrument can calculate distances usingPythagoras’ theorem.Make sure you adhere to the prescribedsequence of measurement:• All target points must be in a horizontal or verticalplane.• The best results are achieved when the instrumentis rotated about a fixed point (e.g. with thepositioning bracket fully folded out and theinstrument placed on a wall).• The minimum/maximum function can be used -see explanation in "Measuring -> Minimum/maximum measurement". The minimum valuemust be used for measurements at right angles tothe target; the maximum distance for all othermeasurements.Make sure that the first measurement and thedistance to be measured are at right angles. Use theMinimum/maximum function, as explained in"Measuring -> Minimum/maximum measurement".Functions16Leica DISTO D3a BT 776750 gb
Indirect measurement - determining a distanceusing 2 auxilliary measurementse.g. for measuring building heights or widths. It is helpfulto use a tripod when measuring heights that require themeasurement of two or three measurements.Press this button four times, the display showsthe following symbol . The laser is switched on.Aim at the upper point (1) and trigger themeasurement. After the first measurement the valueis adopted. Keep the instrument as horizontal aspossible.Press and hold down this button to triggercontinuous measurement, sweep the laser back andforth and up and down over the ideal target point.Press to stop continuous measurement (2). Theresult is displayed in the summary line, the partialresults in the secondary line.Indirect Measurement - determining a distanceusing 3 measurements123Press this button five times; the display showsthe following symbol . The laser is switched on.Aim at the upper point (1) and trigger themeasurement. After the first measurement the value isadopted. Keep the instrument as horizontal as possiblePress and hold down this button to triggercontinuous measurement, sweep the laser up anddown over the ideal target point.Press to stop continuous measurement (2). TheDGBFIEPNLDKSNFINJCNROKPLHRUSCZLeica DISTO D3a BT 776750 gb17 Functions
Page 1 and 2: User ManualEnglishCongratulations o
Page 3 and 4: • To understand the safety instru
Page 5 and 6: • Do not use the product near you
Page 7 and 8: Changing the reference point(multif
Page 9 and 10: Menu functionsSettingsThe menu allo
Page 11 and 12: Reset - returning the instrument to
Page 13 and 14: Laser continuousPress and hold down
Page 15: Triangular areaThe area of a triang
Page 19 and 20: constant to the required value usin
Page 21 and 22: Cause245 2nd button pressedalthough
Page 23 and 24: CareDo not immerse the instrument i
Page 25: Leica Geosystems AG, Heerbrugg, Swi

User Manual - MBS Survey Software Ltd.

Create successful ePaper yourself

Delete template?

Save as template?