Owner's Manual (FP-7F_OM.pdf) - Roland

More documents

Recommendations

Info

PerformingCreating a Personalized Piano Sound (Piano Designer)The FP-7F lets you create your own piano sound by adjusting settings such as the sympathetic resonance of the piano strings. This function is called“Piano Designer.”1. Enter Function mode, and choose “Piano Designer” (p. 64).2. Press the [PIANO] button.MEMOTo access the Piano Designer screen directly without entering Function mode, select the “Grand Piano1” tone, and then hold down the [DISPLAY]button and press the [PIANO] button.3. Use the [-] [+] buttons to select the item you want to edit (p. 35).4. Press the [PIANO] button.An edit screen for the items will appear.Pressing the [DISPLAY] button will take you back to the Piano Designer screen.5. Use the [-] [+] buttons to edit the setting.6. Repeat steps 3–5 to create your own personalized piano sound.7. Press the [FUNCTION] button to exit function mode.MEMOThe edited settings will return to their original values when you turn off the power.If desired, you can have these settings be retained even while the power is turned off (p. 75).34
PerformingPiano Designer SettingsParameter Value ExplanationLid 0–6Damper Resonance Off, 1–10Hammer Noise -2–0–2Hammer Response Off, 1–10Duplex Scale Off, 1–10String Resonance Off, 1–10Key Off Resonance Off, 1–10Cabinet Resonance Off, 1–10Damper Noise Off, 1–10Adjusts the extent to which the lid of the grand piano is open.Lower values produce a softer sound.Higher values produce a brighter sound.This adjusts the damper resonance of the acoustic piano sound (the sympathetic vibrationproduced in strings other than those actually played when you press the damper pedal).Higher settings will make the sympathetic vibration louder.This adjusts the sound produced when the hammer of an acoustic piano strikes the string.Higher settings will produce a louder sound of the hammer striking the string.This adjusts the time from when you play a key until the piano sound is heard.Higher settings will produce slower response.This adjusts the sympathetic vibrations of an acoustic piano’s Duplex Scale.Higher settings will make the sympathetic vibration louder.This adjusts the string resonance of the acoustic piano sound (the sympathetic vibrations ofstrings for previously played notes that occur when you play another note).Higher settings will make the sympathetic vibration louder.This adjusts sympathetic vibrations such as an acoustic piano’s key-off sound (the subtle soundthat occurs when you release a note).Higher settings will make the sympathetic vibration louder.Adjusts the body resonance of the grand piano itself.Higher values will produce a larger body resonance.This adjusts the damper noise of the acoustic piano sound (the sound of the damper releasingthe strings when you press the damper pedal).* If Damper Resonance is turned “Off,” damper noise will not be heard.This lets you specify the amount of “stretch tuning,” a tuning method specifically for pianos, inwhich the high range is tuned slightly sharper, and the low range is tuned slightly flatter.If you select “Preset,” a standard tuning curve created for the FP-7F will be used.If you select “User,” you’ll be able to edit the stretched tuning yourself. Play the key whose pitchyou want to adjust, then use the [-] or [+] buttons to adjust its pitch.Stretch TuningOff, Preset,User (User: -50–0–+50)What is the Duplex Scale?The Duplex Scale is a system of sympathetically vibrating strings sometimes included in grand pianos.These sympathetically vibrating strings are not struck directly with hammers, but sound by vibrating in sympathy with the vibrations of otherstrings. By resonating with the overtones, these strings add richness and brilliance to the sound. These sympathetic strings are added only tothe high register above approximately C4. Since they do not have a damper (a mechanism that stops them from sounding), they will continuesounding even after you play a note and then release it to stop the sound of the string that was actually struck.35
Page 3 and 4: IntroductionFull-fledged Piano Perf
Page 5 and 6: ContentsDeleting a Registration Set
Page 7: USING THE UNIT SAFELYTurn off the p
Page 11 and 12: Panel Descriptions1516 17 18 19 20
Page 13 and 14: Panel DescriptionsOther Connectors2
Page 15 and 16: Before You PlayTurning the Power Of
Page 19 and 20: Listening to the Demo SongsHere’s
Page 21 and 22: PerformingPerforming with the Metro
Page 24: PerformingAdding Reverberation (Rev
Page 28 and 29: PerformingChanging the Right-hand T
Page 30 and 31: PerformingChanging the Pitch of the
Page 32 and 33: PerformingPerforming with Audio Fil
Page 36 and 37: PerformingSimulating the Way that S
Page 38: Performing5. Press one of the TONE
Page 41 and 42: Listening to SongsPlaying Back Song
Page 43 and 44: Listening to SongsChanging the Play
Page 45 and 46: Performing Along with Rhythm (Sessi
Page 47 and 48: Creating an Original Chord Progress
Page 49 and 50: Registering Your Favorite Performan
Page 51 and 52: Registering Your Favorite Performan
Page 53 and 54: Starting and Stopping Recording1. P
Page 55 and 56: Listening to the Recorded Performan
Page 57 and 58: Recording Your PerformanceRenaming
Page 59 and 60: Recording Your PerformanceSelecting
Page 61 and 62: Recording a Layered Performance (Lo
Page 63 and 64: Recording a Layered Performance (Lo
Page 65 and 66: Detailed Settings for Various Funct
Page 73: Detailed Settings for Various Funct
Page 76 and 77: Connections with Other EquipmentCon
Page 78 and 79: Connections with Other EquipmentFor
Page 80 and 81: Connections with Other EquipmentCha
Page 82 and 83: Connections with Other EquipmentCon
Page 84 and 85:
Connections with Other EquipmentPre
Page 86 and 87:
Connections with Other EquipmentUsi
Page 88 and 89:
TroubleshootingSound does not play
Page 90 and 91:
Error MessagesIndicationError: 1Err
Page 92 and 93:
Tone ListPIANONo. Tone name001 Gran
Page 94 and 95:
Tone ListSTANDARD Set27 High-Q28 Sl
Page 96 and 97:
Chord Progression Pattern List96It
Page 98 and 99:
Looper Rhythm ListNo.Looper rhythmC
Page 100 and 101:
Chord Fingering Listsymbol: Indicat
Page 102 and 103:
Main SpecificationsFP-7F: Digital P
Page 104 and 105:
104Symbols[-] button . . . . . . .
Page 106 and 107:
106IndexSound module . . . . . . .
Page 108 and 109:
InformationWhen you need repair ser
Page 110:
For EU CountriesThis product compli
show all

Owner's Manual (FP-7F_OM.pdf) - Roland

Create successful ePaper yourself

Delete template?

Save as template?