Pipelaying Tender-VOL II - WorleyParsons.com

EPMC SERVICES FOR REWARI – KANPUR PIPELINESPECIFICATION FOR GEOTEXTILE BAGS8. DOCUMENTATIONFollowing documents shall be submitted for review before installation of geo-textile bags8.1 All necessary calculations to demonstrate the suitability of proposed geo-textile bags forpipeline anti-buoyancy measures under the specified design conditions, the manufacturer shallprovide an undertaking that the proposed geo-textile bags are suitable for 18" 3 layerpolyethylene coated line pipe. Three layers PE coating shall be 2.2 mm thick.8.2 All details of proposed geo-textile bags (such as dimensions, material used etc.) shall befurnished. Contractor shall highlight any special features if any.8.3 General arrangement drawings of all items viz. set of geo-textile bags, hopper, loadingarrangement etc.8.4 Details of all associated equipment (hoppers etc.), spares, tools etc required to fill,transport and install geo-textile bags on the pipeline.8.5 Complete descriptive technical catalogues describing the materials offered along withsamples of geo-textile bags, its properties, testing results and installation instruction asapplicable specifically to the project, Specific storage and handling instructions.8.6 Manufacturer shall highlight any precautions / safety measures to be taken.n:\513-mh-2145-rkpl\11 engineering\11.8 pipelines\06 spec\specification for geotextile bags\mh2145-c000-plspc-0023.docMH2145-C000-PL-SPC-0023 RevA Page 11 of 11