Pipelaying Tender-VOL II - WorleyParsons.com

EPMC SERVICES FOR REWARI – KANPUR PIPELINESPECIFICATION FOR DOCUMENTATION FOR PIPELINE CONSTRUCTION• Location and type of bends, fittings etc. and grades, points of intersection.• Changes of wall thickness, materials.• Location and details of valves, insulating joints, fencing.• Location and details of road, railway, water crossing, suspension bridges.• Location and details of crossing pipes, vents.• Location and type of coating.• Location and type of weighing, anchoring.• Location and type of markers.• Location of further appurtenances (Pig-signallers).• Location of ROU and of pipeline with respect of ROU.• Type of soil.• Type of rock.• Type of blasting and ripping• Sand padding.• Type of road pavement.• Details of bank protection, number of insulators, seals.The CONTRACTOR shall also prepare isometric drawings of installation (facilities) within terminals andstations etc. for which the data as mentioned in or required for the Pipe and Welding Book can beidentified and these drawings can also be used for material accounting.3.3 Name plates of EquipmentAll permanent equipment supplied and installed by CONTRACTOR shall be provided with plates byCONTRACTOR. All texts shall be submitted to WP/HPCL for approval before plates may bemanufactured.3.4 Pipe BookEvery page of the Pipe and Welding Book shall mention:• Data relevant to the project and section thereof• Sequential number• Length brought forward (for pipes and other materials).n:\513-mh-2145-rkpl\11 engineering\11.8 pipelines\06 spec\specification for documentation for pipelineconstruction\mh2145-c000-pl-spc-0021.docMH2145-C000-PL-SPC-0021 RevA Page 10 of 12