Pipelaying Tender-VOL II - WorleyParsons.com

More documents

Recommendations

Info

PageEPMC SERVICES FOR REWARI – KANPUR PIPELINE PROJECTBASIS OF DESIGN (PIPELINE)3. CODES, STANDARDS, SPECIFICATIONS AND REGULATORYREQUIREMENTS3.1 GeneralCodes and Standards that are applicable are as listed in Appendix- 2. Latest edition of codes andstandards shall apply. The precedence applying for use of the Codes, Standards, Specifications andRegulatory requirements for this project is as follows:• Regulatory Requirements• Job Specifications and Standards Specifications• Country Standards• International StandardsBasically, the following are applicableLaws- Codes & Rules as mandatory under the legislation of India, among others, but not limited toand due attention shall be paid to the following:• OISD: Oil Industry Safety Directorate• PMPA: Petroleum & Mineral Pipelines Act, 1962• Railways/Forest/NH/Other Pipelines- Terms and conditions applicable• Petroleum Act 1934 & Rules 2002• MOE&F- Ministry of Environment & Forest guidelines• PNGRB Guidelines : Petroleum and Natural Gas Regulatory Board, India• PESO/CCOE: Petroleum and Explosives Safety Organization / Chief Controller of Explosives• MBLAL Committee: OISPP & JIC RecommendationsThe set of Laws-Codes and rules that have been agreed between HPCL and the authorities for theimplementation of the high pressure system where applicable ASME (ANSI) B31.4 (2012) AmericanCode and relating US code applicable for similar facilitiesThe “Rules of Good Practice” commonly used by the worldwide Oil Industry.The “Rule of Art” and “Sound Practice” of the engineer whichever is the most stringent. In case of acontradictory stipulation, the more stringent condition shall prevail.n:\513-mh-2145-rkpl\11 engineering\11.8 pipelines\02 bod\working\mh2145-c000-pl-bod-0001_rev 0 .doc EV435-JH0902-00-GEN-BOD-0001 Rev 09 of 34
PageEPMC SERVICES FOR REWARI – KANPUR PIPELINE PROJECTBASIS OF DESIGN (PIPELINE)Any inconsistencies critical to the design shall be brought to the attention of the Purchaser forresolution.Specification / code breaks shall be indicated in the drawings for tie-in and modifications. These shallbe reviewed by HPCL / WP before implementation.3.2 Regulatory RequirementsAll aspects of the Project (i.e. design, construction, commissioning and operation) shall comply withthe requirements of PNGRB and the latest versions of all relevant local regulatory requirements.Impact to any regulatory approval to the existing system due to modifications for tie-ins shall bepointed out by WP, reviewed by HPCL and approval obtained before proceeding with the design.n:\513-mh-2145-rkpl\11 engineering\11.8 pipelines\02 bod\working\mh2145-c000-pl-bod-0001_rev 0 .doc EV435-JH0902-00-GEN-BOD-0001 Rev 010 of 34
Page 1 and 2:
EPMC Services for Rewari-KanpurPipe
Page 3 and 4:
EPMC SERVICES FOR REWARI - KANPUR P
Page 5 and 6:
Page 7 and 8:
Page 9 and 10:
Page 11 and 12:
Page 13 and 14:
Page 15 and 16:
Page 17 and 18:
Page 19 and 20:
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
Page 29 and 30:
EPMC Services for Rewari-KanpurPipe
Page 31 and 32:
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
Page 41 and 42:
Page 43 and 44:
Page 45 and 46:
Page 47 and 48:
Page 49 and 50:
Page 51 and 52:
Page 53 and 54:
Page 55 and 56:
Page 57 and 58:
Page 59 and 60:
Page 61 and 62:
Page 63 and 64:
Page 65 and 66:
Page 67 and 68:
Page 69 and 70: EPMC SERVICES FOR REWARI - KANPUR P
Page 71 and 72: EPMC Services for Rewari-KanpurPipe
Page 113 and 114: PageEPMC SERVICES FOR REWARI - KANP
Page 119: PageEPMC SERVICES FOR REWARI - KANP
Page 145: PageEPMC SERVICES FOR REWARI - KANP
show all

Pipelaying Tender-VOL II - WorleyParsons.com

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?