Installation and Configuration Guide - Axceleon

E N F U Z I O N F O R R E N D E R F A R M S I N S T A L L A T I O N A N D C O N F I G U R A T I O N G U I D EFigure 3-18: Confirm the new Computer Node is running3.3.7 EnFuzion Node Start-up Script for Windows-based Compute NodesEnFuzion requires users to supply a Node Start-up Script for each Windows-based Compute Node.EnFuzion executes this Node Start-up Script each time a Compute Node is started or restarted, andcauses the Compute Node to mount your Shared File Repository. Failure to provide a Node Start-upScript for a Compute Node may cause rendering to fail on that node. Please refer to Chapter 6 forinformation on how to set up a Shared File Repository.An EnFuzion Node Start-up Script must be named startup.bat, and it must be placed in the[EnFuzion_Installation_Directory]/bin directory on each Compute Node. The script must conform insyntax to a Windows batch file. An example startup.bat is provided in the[EnFuzion_Installation_Directory]/bin directory. Please modify this file to adapt it for your environment.After you make any changes to a startup.bat file on a Compute Node, you must restart the EnFuzionNode Service on that Compute Node. To do this, choose Windows StartAllProgramsEnFuzionCompute Node Utilities, from there, choose--> Stop EnFuzion Node Service,--> Register EnFuzion Node Service, and finally--> Start EnFuzion Node ServiceThere is no equivalent to startup.bat on Mac OS X and Linux platforms.3.3.8 Installing and Configuring a User Submit ComputerStep 1:Identify the first User Submit Computer you will install and configure.Step 2: Start the EnFuzion setup wizard as you have before. When prompted to select the componentto install, select User Submit Computer, as shown in Figure 3-19. Click Next to continue.22