Installation and Configuration Guide - Axceleon

E N F U Z I O N F O R R E N D E R F A R M S I N S T A L L A T I O N A N D C O N F I G U R A T I O N G U I D ECopy the EnFuzion installation package to a location under the enfuzion user’s home directory. TheEnFuzion installation package format for Linux is enfuzion*linux*.tar.gz.Unpack the EnFuzion installation package using the following command:tar zxvf enfuzion*linux*.tar.gzChange your working directory to the unpacked EnFuzion installation package:cd enfuzion*linux*Execute the install-root script to install the EnFuzion files for the Control Root Computer:./install-rootEnFuzion files will be installed in the $HOME/enfuzion directory.Install the EnFuzion license key. Obtain a file with an EnFuzion license key and copy it to the EnFuzionconfig directory. The file with the EnFuzion license key must be named enflicense.txt. The location ofthe config directory is $HOME/enfuzion/config:cp enflicense.txt $HOME/enfuzion/configThis completes the installation of the EnFuzion package and the license key on your Control Root Computer.The remaining step of configuring the Control Root Computer is to set up EnFuzion as a service, so that it isstarted automatically.Change your working directory to the unpacked EnFuzion installation package:cd enfuzion*linux*On the Control Root Computer, login as the root super usersuExecute the install-service script to install the EnFuzion service:./install-serviceTo start EnFuzion, reboot the computer or execute:/etc/init.d/enfuzion start27