Installation and Configuration Guide - Axceleon

E N F U Z I O N F O R R E N D E R F A R M S I N S T A L L A T I O N A N D C O N F I G U R A T I O N G U I D EFor our one-machine render farm, the URL can be http://localhost:10101From the EnFuzion Web Interface, click on Cluster. You should see that your cluster is Running, as shownin Figure 4-1.From the Web interface you can see that:You have 1 Cluster, named after your computerYou have 1 NodeYou have 0 RunsIf you do not see the Web page, please see the section below titled Common Installation Problems.Figure 4-1: One-machine render farm runningBy completing all the steps in the previous sections, you have successfully setup and configured a onemachinerender farm.4.1.8 Common Installation ProblemsThe most common installation problems can lead to the following symptoms at the end of the installationprocess:Some or all of the required EnFuzion processes enfdispatcher, enfeye, enfnodeserver are notrunningYou cannot connect to the EnFuzion Web InterfaceThe EnFuzion3D v11 Interface runs sluggishlyMost common installation problems have to do with expired license key files, blocked port numbers andantivirus software. Diagnostic tips and solutions for these problems can be found in the EnFuzion3D v1130