Liebert Challenger 3000 with iCOM

Split System ModelsFigure 39 5-ton centrifugal air-cooled condensing unit dimensional data (con't.)Field-Supplied Unit DisconnectSwitch when Factory UnitDisconnect Switch is not SuppliedElectric servicenot by LiebertOptionalFactory-InstalledDisconnect SwitchAIR COOLEDRemovable Access PanelsConnection terminalfor field-suppliedearth grounding wireLine Voltage Electric PowerSupply Conduit VoltageField-Supplied 24V NEC Class 2wiring between condensing unitand fan/coil unitLow-voltageelectric powersupply conduitentranceNOTES:Refer to specification sheet for full load amp and wire size amp ratings.Control voltage wiring must be a minimum of 16 G A (1.6mm) for upto 75’ (23m) or not to exceed 1 volt drop in control line.Heat rejection connection. Field-supplied24V NEC Class 2 wiring. See Note 2.Wire connections from evaporator module.1. 24V GND2. 24V supply3. High pressure alarm (optional)4. Hot gas bypass connection (only onunits with hot gas bypass)DPN000226_Rev070