22.08.2015 Views

Liebert Challenger 3000 with iCOM

Liebert Challenger™ 3000 with iCOM Installation Manual - 3 ... - DCES

Liebert Challenger™ 3000 with iCOM Installation Manual - 3 ... - DCES

SHOW MORE
SHOW LESS
  • No tags were found...

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Split System ModelsFigure 44 5-ton water/glycol-cooled condensing unit (con't.)Field-supplied unit disconnectswitch when factory unitdisconnect switch is not supliedElectric service;not by <strong>Liebert</strong>WATER/GLYCOLOptional factory-installeddisconnect switchField-supplied 24VNEC Class 1 wiringto fan/coil unitField-supplied 24VNEC Class 1 wiringto drycooler(glycol-cooled units only)Line voltage electricpower supply conduit voltageRemovableAccess PanelHeat rejection connection.Field-supplied 24V NEC Class 2 wiring.Wire connections from evaporator mod:1. 24V ground2. 24V supply3. High pressure alarm (optional)4. Hot gas bypass connection(only on units <strong>with</strong> hot gas bypass)Remote drycoolerconnection; field-supplied24V NEC Class 1 wiring(glycol-cooled units only)Connection terminalfor field-suppliedearth grounding wireLow-voltage electricpower supply conduitentranceField-supplied 24V NECClass 1 wiring betweenglycol condensing unitand drycoolerDPN000228_Rev0NOTES1. Refer to specification sheet for full load amp. and wire size amp. ratings.2. Control voltage wiring must be a minimum of 16 G A (1.6mm) for up to 75' (23m)or not to exceed 1 volt drop in control line.76

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!