ALPHA Distribution Boards and Terminal Blocks

ALPHA 8HP Molded-Plastic Distribution Systems
Accessories
Mounting accessories
© Siemens AG 2010
8
a
b
Enclosure size 1
a
I2_13844
d
b
c
Enclosure size 2
I2_13845
a
d
b
I2_13846
c
Enclosure size 2.5
a
f
b
Version DT Order No. Price
per PU
Mounting of open flange openings for enclosures of the
size 1 to 4
Order note
• Please add "-Z" to the order number of the desired enclosure.
• The respective opening must be defined in the description of
the supplement.
• The openings are marked according to diagrams from the top
left in the clockwise direction with the letters continuing from the
top depending on the position. If there are several openings per
enclosure, the code letters are to be separated by commas.
• Please select the letter where the open opening should be.
• Once you have specified all enclosures in the "Z" order, please
add our mounting order number 8HP1 898 with the appropriate
number of total openings for all enclosures (see ordering
example).
Ordering example
• Various enclosures with different openings should be defined
for order at a plant.
• Two enclosures of size 2 are required, openings a, b, c and
a, c, d. An enclosure of size 3 is also required, openings b, c.
Order text Order number Number
• Enclosure size 2 with openings a, b, c 8HP2 002-Z 1
Z=a,b,c
• Enclosure size 2 with openings a, c, d 8HP2 002-Z 1
Z=a,c,d
• Enclosure size 3 1) with openings b, c 8HP2 003-Z 1
Z=b,c
• Mounting 8HP1 898 8
Footnote
The two cable entries are on side "d".
PU
Unit(s)
PS*/
P. unit
Unit(s)
PG
} 8HP1 898 1 1 046
e
d
Enclosure size 3
c
I2_13847
a
b
h
c
g
f
Enclosure size 4
e
d
I2_13848
8/40 Siemens ET A1 · 10/2009