ALPHA Distribution Boards and Terminal Blocks

© Siemens AG 2010
ALPHA FIX Terminal Blocks
Plug-In Terminals
Introduction
Conductor crosssection
1)
Terminal type 1)
Only the main terminal types are listed here. You will find further versions on the following pages.
Rated short-time withstand current
Connection type → Plug-in
terminals
Our plug-in terminals are able to withstand a rated short-time
current corresponding to a current density of 120 A/mm 2 specific
to the nominal cross-section for a duration of one second.
Screw terminals
Plug-in
terminals
Version → Standard Standard Insta
Number of clamping points → 2 2
Order No. (Digits 1 ... 7) → 8WH4 000 8WH1 001 8WH4 001
Color
Order No.
(digits 8 ... 12)
2.5 mm 2 Through-type Gray ✔ -- -- 0AF00
Blue ✔ -- -- 0AF01
Neutral
Blue ✔ -- -- 0BF00
isolating
PU Green-yellow ✔ -- -- 0CF07
Insta L Gray -- -- ✔ 0AF00
L/L -- -- ✔ 4DF00
L/N -- -- ✔ 4CF00
PE/L/L -- -- ✔ 4HF00
PE/L/N -- -- ✔ 4EF00
PE/L/NT -- -- ✔ 4FF00
PE/L/N isolating
-- -- ✔ 4GF00
blade
PE/L/L isolating
-- -- ✔ 4NF00
blade
4 mm 2 Through-type Gray ✔ -- -- 0AG00
Blue ✔ -- -- 0AG01
Neutral isolating Gray ✔ -- -- 0BG00
PU Green-yellow ✔ -- -- 0CG07
6 mm 2 Through-type Gray ✔ -- -- 0AH00
Blue ✔ -- -- 0AH01
Neutral isolating Blue ✔ -- -- 0BH00
PU Green-yellow ✔ -- -- 0CH07
10 mm 2 Neutral isolating Blue -- ✔ -- 0BJ01
16 mm 2 Through-type Blue -- ✔ -- 0AK01
Gray -- ✔ -- 0AK00
Neutral isolating Blue -- ✔ -- 0BK01
PU Green-yellow -- ✔ -- 0CK07
35 mm 2 Through-type Gray -- ✔ -- 0AM00
Blue -- ✔ -- 0AM01
Neutral isolating Blue -- ✔ -- 0BM01
PU Green-yellow -- ✔ -- 0CM07
13
Siemens ET A1 · 10/2009
13/3