ALPHA Distribution Boards and Terminal Blocks

© Siemens AG 2010
ALPHA FIX Terminal Blocks
iPo Plug-In Terminals
8WH6 isolating blade terminals
■ Technical specifications
8WH6 000-6AF00 8WH6 003-6AF00 8WH6 004-6AF00
Dimensions
• Width / Length / Height (NS 35/7.5) in mm 5.2 / 60.5 / 36.5 5.2 / 74 / 36.5 5.2 / 84 / 36.5
Max. electrical data
• I max in A 20 20 1)
• U max in V 400
•Max. Ø inmm 2 0.14 ... 4
•AWG 26-12
Rating acc. to IEC 60947-7-1
• Rated voltage (V) (IEC) 400 800 / --
• Rated current in A / cross-section in mm² (IEC) 20 / 2.5 20 1) / 2.5
• Nominal cross-section in mm² 2.5
• AWG cross-section range (IEC) 26-12
Connection capacities
• 1-wire
- Rigid in mm² 0.14 ... 4
- Flexible in mm² 0.14 ... 2.5
- Flexible end sleeve with/without plastic sleeve in mm² 0.14 ... 2.5
• 2 conductors, flexible, with TWIN end sleeve in mm² 0.5
• Conductor cross-section, direct plug-in
- Rigid in mm² 0.34 ... 4
- Flexible end sleeve with/without plastic sleeve in mm² 0.34 ... 2.5
General data
• Stripped length in mm 10
• Molded plastic
PA
• Flammability class acc. to UL 94
V0
1) The total current through all connected conductors must not exceed the
max. load current.
■ Selection and ordering data
Terminal size 2.5 mm²
8WH6 000-6AF00
Accessories
8WH9 000-3SC00
8WH9 070-0AA00
Version DT Order No. Price
per PU
PU
Unit(s)
PS*/
P. unit
Unit(s)
Isolating blade terminals, terminal size 2.5 mm²
• Terminal width 5.2 mm
• I max = 20 A
• U max = 400 V
• AWG 26-12
• Connection capacity, one conductor
- Rigid, 0.14 ... 4 mm²
- Flexible, 0.14 ... 2.5 mm²
• Connection capacity, two conductors
- Rigid, 0.34 ... 4 mm²
Versions
• Two clamping points C 8WH6 000-6AF00 1 50 044
• Three clamping points C 8WH6 003-6AF00 1 50 044
• Four clamping points C 8WH6 004-6AF00 1 50 044
Accessories Section Page
• Covers, for terminal size 2.5 mm 2
- For two clamping points Accessories 12/7 C 8WH9 000-3SC00 100 50 044
- For three clamping points dto. 12/7 C 8WH9 000-3SD00 100 50 044
- For four clamping points dto. 12/7 C 8WH9 000-5GA00 100 50 044
• Compartment partitions, for terminal size
1.5...4mm 2
- For two clamping points Accessories 12/7 C 8WH9 070-0AA00 100 50 044
- For three clamping points dto. 12/7 C 8WH9 070-0GA00 100 50 044
Covers, for terminal size 2.5 mm²
Width 2.2 mm
Versions
• For two clamping points C 8WH9 000-3SC00 100 50 044
• For three clamping points C 8WH9 000-3SD00 100 50 044
• For four clamping points C 8WH9 000-5GA00 100 50 044
Compartment partitions, for terminal size 1.5 ... 4 mm²
• For visual and electrical separation of terminal groups
• 2 mm thick
•Gray
Versions
• For two clamping points C 8WH9 070-0AA00 100 50 044
• For three clamping points C 8WH9 070-0GA00 100 50 044
PG
12
* You can order this quantity or a multiple thereof.
Siemens ET A1 · 10/2009
12/7