ALPHA Distribution Boards and Terminal Blocks

ALPHA FIX Terminal Blocks
iPo Plug-In Terminals
8WH6 through-type terminals
© Siemens AG 2010
■ Overview
8WH6 through-type terminals are ideal for the direct tool-free
wiring of conductors with end sleeve or rigid conductors. Easy
insertion of flexible conductors with end sleeves upwards of
0.34 mm 2 . The actuation key can be used to open the clamping
point with any type of screwdriver in order to unwire or wire small
conductors. The compact design and front connection permit
wiring in the narrowest of spaces. The double bridge slot
enables fast creation of an individual potential distribution and
infeed, e.g. using a screw terminal.
■ Technical specifications
12
8WH6 000-0AF00
8WH6 000-0AF01
1) The total current through all connected conductors must not exceed the
max. load current.
8WH6 003-0AF00
8WH6 003-0AF01
8WH6 004-0AF00
8WH6 004-0AF01
Dimensions
• Width / Length / Height (NS 35/7.5) in mm 5.2 / 48.5 / 36.5 5.2 / 60.5 / 36.5 5.2 / 72 / 36.5
Max. electrical data
• I max in A 30 30 1)
• U max in V 800
•Max. Ø inmm 2 0.14 ... 4
•AWG 26-12
Rating acc. to IEC 60947-7-1
• Rated voltage in V (IEC / UL/CSA) 800 / 600 800 / --
• Rated current in A / cross-section in mm²
-IEC 24 / 2.5 24 1) / 2.5
-UL/CSA 20 / -- --
• Nominal cross-section in mm² 2.5
• AWG cross-sectional range (IEC / UL/CSA) 26-12 / 24-12 26-12 / --
Connection capacities
• 1-wire
- Rigid in mm² 0.14 ... 4
- Flexible in mm² 0.14 ... 2.5
- Flexible end sleeve with/without plastic sleeve 0.14 ... 2.5
in mm²
• 2 conductors, flexible, with TWIN end sleeve in mm² 0.5
• Conductor cross-section, direct plug-in
- Rigid in mm² 0.34 ... 4
- Flexible end sleeve with/without plastic sleeve 0.34 ... 2.5
in mm²
General Data
• Stripped length in mm 10
• Molded plastic
PA
• Flammability class acc. to UL 94
V0
8WH6 000-0CF07 8WH6 003-0CF07 8WH6 004-0CF07
Dimensions
• Width / Length / Height (NS 35/7.5) in mm 5.2 / 48.5 / 36.5 5.2 / 60.5 / 36.5 5.2 / 72 / 36.5
Max. electrical data
•Max. Ø inmm 2 0.14 ... 4
•AWG 26-12
Rating acc. to IEC 60947-7-1
• Nominal cross-section in mm² 2.5
• AWG cross-sectional range (IEC / UL/CSA) 26-12 / 24-12 26-12 / --
Connection capacities
• 1-wire
- Rigid in mm² 0.14 ... 4
- Flexible end sleeve with/without plastic sleeve in mm² 0.14 ... 2.5
• 2 conductors, flexible, with TWIN end sleeve in mm² 0.5
• Conductor cross-section, direct plug-in
- Rigid in mm² 0.34 ... 4
- Flexible end sleeve with/without plastic sleeve in mm² 0.34 ... 2.5
General data
• Stripped length in mm 10
• Molded plastic
PA
• Flammability class acc. to UL 94
V0
12/4 Siemens ET A1 · 10/2009