Dunkermotoren Motors Gearboxes and Controllers

More documents

Recommendations

Info

Servo Tube SA/ SC 38 | cont. 615 N, peak 3690 N » Highly dynamic 3-phase linear motor » Available in three lengths » Actuator version SA (with maintenance-free sleeve bearing system) » Component version SC (for modules) » Linear encoder integrated » Standard version with connection for water cooling » Can be operated with commercially available servocontrollers » Hochdynamischer 3-Phasen Linearmotor » In drei Baulängen verfügbar » Komponentenausführung SC (für Module) » Linearencoder integriert » Aktuatorausführung SA (mit wartungsfreiem Gleitlagersystem) » Standardmäßig mit Anschluss für Wasserkühlung » Kann mit handelsüblichen Servoreglern betrieben werden; » Settings zum Beispiel für Schneider, Siemens etc. vorhanden ..... IP 65 V 325, 560 Force mode Precise positioning Maintenance free Low noise High Force High dynamic Food grade Special surface available Protection class (up to) Supply voltage versions 1 Vss SSI, BISS, TTL Feedback integrated Feedback integrated Certification Certification Data preliminary/ Technische Daten vorläufig SA/ SC 3806 SA/ SC 3810 SA/ SC 3814 Nominal voltage/ Nennspannung VDC 325 560 325 560 325 560 Peak current 1) / Spitzenstrom 1) A pk 30 26 30 18 30 Peak force 1) / Spitzenkraft 1) N 1581 2285 2637 2214 3690 Nominal current (w/o water cooling) 2) / Nennstrom (ohne Wasserkühlung) 2) A pk 2.65 2.58 2.5 Nominal force (w/o water cooling) 2) / Dauerkraft (ohne Wasserkühlung) 2) N 140 226 308 Nominal current (with water cooling) 2) / Nennstrom (mit Wasserkühlung) 2) A pk 5.3 5.15 5 Nominal force (with water cooling) 2) / Dauerkraft (mit Wasserkühlung) 2) N 279 452 615 Maximum speed (SA) 2) / Maximalgeschwindigkeit (SA) 2) m/s * ) 3.8 6.3 2.7 4.4 2 3.4 Peak acceleration (SA) 2) / Spitzenbeschleunigung (SA) 2) m/s 2** ) >200 >200 >200 >200 >200 >200 Maximum speed (SC) 2) / Maximalgeschwindigkeit (SC) 2) m/s ***) 4.7 8.3 2.9 5.2 2.9 3.7 Peak acceleration (SC) 2) / Spitzenbeschleunigung (SC) 2) m/s 2*** ) >200 >200 >200 >200 >200 >200 Pole pitch/ Polabstand mm 51.2 51.2 51.2 Force constant (sine commutation) 1) / Kraftkonstante (Sinus kommutiert) 1) N/A pk 52.7 87.9 123 Forcer mass/ Motorgewicht Rod mass/ Magnetstangengewicht kg 3.0 5.0 7.2 kg/m 8.3 8.3 8.3 * Moving magnetic rod with 4xx mm stroke ** Moving magnetic rod with 2x mm stroke *** Moving motor housing with 2xxx mm stroke/ * Bewegte Magnetstange mit 4xx mm Hub ** Bewegte Magnetstange mit 2x mm Hub *** Bewegtes Motorgehäuse mit 2xxx mm Hub 1) At 25°C/ Bei 25°C 2) At 100°C/ Bei 100°C 144 | Visit www.dunkermotoren.com for further product information/ Besuchen Sie www.dunkermotoren.de für weitere Produktinformationen
Servo Tube SA/ SC 38 | cont. 615 N, peak 3690 N Dimensions in mm/ Maßzeichnung in mm L F SA3814 530.6 SA3810 428.2 SA3806 325.8 Hub H G = L R - L F = H 1 + H 2 Linear products L F SC3814 462.8 SC3810 360.2 SC3806 257.8 = 295 to 2014 ■ Preferred series/ Vorzugsreihe ■ Standard product/ Standardprodukt ■ On request/ auf Anfrage See notes page 8/ Hinweise siehe S. 8 Visit www.dunkermotoren.com for further product information/ Besuchen Sie www.dunkermotoren.de für weitere Produktinformationen | 145
Page 1:
BG 75 dPro PN/EC/EI Preliminary Ver
Page 4 and 5:
Who we are/ Wer wir sind Dunkermoto
Page 6 and 7:
Motion control 4.0/ Motion Control
Page 8 and 9:
Product classification/ Produktklas
Page 10 and 11:
GR/G brush type DC/ GR/G-Bürstenbe
Page 12 and 13:
BG brushless DC/ BG-Bürstenlose Gl
Page 14 and 15:
KD/DR AC motors/ KD/DR-Wechsel- Dre
Page 16 and 17:
CASM electric cylinders/ CASM-Elekt
Page 18 and 19:
Operating modes/ Betriebsarten dMov
Page 20 and 21:
Software/ Software Drive Assistant
Page 22 and 23:
Software/ Software Positioning modu
Page 24 and 25:
Software/ Software MotionCode Progr
Page 26 and 27:
Technical information/ Technische I
Page 28 and 29:
Page 30 and 31:
Page 32 and 33:
Handbook for selection of motors/ F
Page 34 and 35:
Brushed DC motors » Series GR/G Th
Page 36 and 37:
G 30.2 | cont. 4 W, peak 5 W » Mec
Page 38 and 39:
G 30.1 | G 30.1S | cont. 7 W, peak
Page 40 and 41:
G 30.1 | G 30.1S | cont. 7 W, peak
Page 42 and 43:
G 30.0 | G 30.0S | cont. 10 W, peak
Page 44 and 45:
GR 42x25 | cont. 15 W, peak 25 W »
Page 46 and 47:
GR 42x40 | cont. 21 W, peak 38 W »
Page 48 and 49:
GR 53x30 | cont. 39 W, peak 81 W »
Page 50 and 51:
GR 53x58 | cont. 61 W, peak 136 W
Page 52 and 53:
GR 63x25 | cont. 50 W, peak 119 W
Page 54 and 55:
GR 63x55 | cont. 99 W, peak 286 W
Page 56 and 57:
GR 63Sx55 | cont. 126 W, peak 368 W
Page 58 and 59:
GR 80x40 | cont. 128 W, peak 370 W
Page 60 and 61:
GR 80x80 | cont. 221 W, peak 851 W
Page 62 and 63:
Brushless DC motors » Series BG Th
Page 64 and 65:
Overview motors/ Übersicht Motoren
Page 66 and 67:
BGA 22 dCore, 8 - 24 Watt » 3-phas
Page 68 and 69:
BG 32 dCore | cont. 20 W, peak 27 W
Page 70 and 71:
BG 42 dCore | cont. 64 W, peak 156
Page 72 and 73:
BG 45 | cont. 80 W, peak 168 W » H
Page 74 and 75:
Page 76 and 77:
BG 65 | cont. 120 W, peak 260 W »
Page 78 and 79:
BG 65S | cont. 186 W, peak 470 W »
Page 80 and 81:
BG 75 | cont. 530 W, peak 1150 W »
Page 82 and 83:
Page 84 and 85:
BGA 22 dGo BG 32 KI BG 42 KI 2-wire
Page 86 and 87:
BGA 22 dGo, 8 - 24 Watt » 3-phase
Page 88 and 89:
BG 32 KI | cont. 20 W, peak 30.5 W
Page 90 and 91:
BG 42 KI | cont. 64 W, peak 110 W
Page 92 and 93:
BG 45 SI BG 45 PI/MI BG 45 CI/PB/EC
Page 94 and 95: BG 45 SI | cont. 74 W, peak 122 W
Page 96 and 97: BG 45 CI/PB/EC | cont. 91 W, peak 1
Page 98 and 99: BG 45 CI/PB/EC | cont. 91 W, peak 1
Page 100 and 101: BG 45 PI/MI | cont. 91 W, peak 159
Page 102 and 103: BG 65 dMove | cont. 274 W, peak 327
Page 104 and 105: BG 66 dMove | cont. 274 W, peak 327
Page 106 and 107: BG 66 dPro CO/IO | cont. 270 W, pea
Page 108 and 109: BG 66 dPro PN/EC/EI | cont. 270 W,
Page 110 and 111: BG 75 dPro CO/IO | cont. 450 W, pea
Page 114 and 115: BG 95 dPro CO/IO | cont. 1100 W, pe
Page 118 and 119: AC motors » Series KD/DR Dunkermot
Page 120 and 121: KD/DR 52.1-2, 20 - 22 Watt » Rugge
Page 124 and 125: KD/DR 52.1-4 | 62.1-4, 5 - 15 Watt
Page 132 and 133: Linear products » Series ST | CASM
Page 134 and 135: ST 11 | cont. 19 N, peak 91 N » In
Page 136 and 137: SCA 11 with integrated amplifier |
Page 138 and 139: ST 25 | cont. 90 N, peak 780 N » I
Page 140 and 141: XTR 25 | cont. 108 N, peak 860 N »
Page 142 and 143: XT 38 | cont. 255 N, peak 1860 N »
Page 146 and 147: Accessories/ Zubehör Brake for STA
Page 148 and 149: Accessories/ Zubehör DME 230x4 »
Page 150 and 151: SM 11 | cont. 19 N, peak 92 N » Se
Page 152 and 153: SM 25 | cont. 90 N, peak 780 N » S
Page 154 and 155: XM 38 | cont. 255 N, peak 1860 N »
Page 156 and 157: LSM 06 | cont. 39 N, peak 200 N »
Page 158 and 159: LSM 13 | cont. 324 N, peak 680 N »
Page 160 and 161: LSG 13 | PLG 52 | cont. 457 N, peak
Page 162 and 163: LSG 13 | SG 62/ 80K | cont. 650 N,
Page 164 and 165: CAHB2M/L | cont. 10.000 N, peak 10.
Page 166 and 167: CASM-32 | cont. 327 N, peak 700 N
Page 172 and 173: CASM-32 CASM-32 Accessories/ Access
Page 174 and 175: Controllers » Series BGE External
Page 176 and 177: BGE 42 | 3004 A, Controller for BG
Page 178 and 179: BGE 5510 dPro CO/IO » Compact 4-qu
Page 180 and 181: BGE 5510 dPro PN/EC/EI » Compact 4
Page 182 and 183: BGE 6005 A » Very compact 4-quadra
Page 184 and 185: BGE 6010 A | BGE 6015 A » Very com
Page 186 and 187: BGE 6060 A » Compact 4-quadrant co
Page 188 and 189: DME 230x4 » Digital servocontrolle
Page 190 and 191: DME 400x8 » Digital servocontrolle
Page 192 and 193: Gearboxes/ Getriebe » Series/ Baur
Page 194 and 195:
PLG 22 HT » Compact high torque pl
Page 196 and 197:
PLG 32 » Compact, industry compati
Page 198 and 199:
PLG 40 LB » Low backlash servo pla
Page 200 and 201:
PLG 42 S » Compact, industry compa
Page 202 and 203:
PLG 52 H » High efficiency » Quie
Page 204 and 205:
Page 206 and 207:
PLG 63 EP » Industry compatible pl
Page 208 and 209:
PLG 63 HT » Industry compatible hi
Page 210 and 211:
PLG 75 EP » Industry compatible pl
Page 212 and 213:
Page 214 and 215:
Page 216 and 217:
Page 218 and 219:
KG 90 » Bevel gearbox with planeta
Page 220 and 221:
SG 45 » Housing made of high-tensi
Page 222 and 223:
SG 65 » Housing made of high-tensi
Page 224 and 225:
SG 85 » Combination with GR 53 and
Page 226 and 227:
SG 120 | SG 120 H | SG 120 K Dimens
Page 228 and 229:
Brakes Brushless motors series BG a
Page 230 and 231:
Brakes/ Bremsen The brakes can be m
Page 232 and 233:
Incremental Encoders/ Inkrementalge
Page 234 and 235:
Absolute encoder/ Absolutwertgeber
Page 236 and 237:
Accessories/ Zubehör | GR Our acce
Page 238 and 239:
Accessories/ Zubehör | BG/BGE BG 3
Page 240 and 241:
Accessories/ Zubehör | BG/BGE 5 Co
Page 242 and 243:
Accessories/ Zubehör | BG/BGE 11 C
Page 244 and 245:
Accessories/ Zubehör | BG/BGE 19 C
Page 246 and 247:
Software/ Software 21 Starter Kit f
Page 250:
Social icon Rounded square Only use
show all

Dunkermotoren Motors Gearboxes and Controllers

Create successful ePaper yourself

Delete template?

Save as template?