Dunkermotoren Motors Gearboxes and Controllers

More documents

Recommendations

Info

PLG 40 LB » Low backlash servo planetary gearbox » High lifetime due to special grease and needle bearing mounted planetary wheels » Protection class IP 52 standard (including output shaft). IP 54/ IP 65 on request. » High efficiency » Long working life > 20.000 h » Spielarmes Servo-Planetengetriebe » Sehr hohe Lebensdauer durch Spezialschmierfett und nadelgelagerte Planetenräder » Schutzart IP 52 Standard (einschließlich Abtriebswelle). IP 54/ IP 65 auf Anfrage. » Hoher Wirkungsgrad » Lange Lebensdauer > 20.000 h η T IP 52 IP 65 Low backlash Lifetime lubrication Food grade lubrication Low temperature lubrication High efficiency Longlife version High torque Protection class Protection class (up to) Data/ Technische Daten | PLG 40 LB - Ring gear made of steel/ Hohlrad aus Stahl Reduction ratio/ Untersetzungsverhältnis Efficiency of gearing parts/ Wirkungsgrad Verzahnungsteile Number of stages/ Stufenzahl - 3 4 5 7 8 10 9 12 15 16 20 25 32 40 64 % 97 95 - 1 2 Continuous torque 1) / Dauerdrehmoment 1) Nm 4 7 7 6 5 4 7 7 7 7 7 7 7 7 6 Continuous torque 2) 5) / Dauerdrehmoment 2) 5) Nm 9 15 14 8.5 6 5 16.5 20 18 20 20 18 20 18 7.5 Acceleration torque 3) / Beschleunigungsmoment 3) Nm 8 14 14 8.5 6 5 14 14 14 14 14 14 14 14 7.5 Emergency stop torque 4) / Not-Aus Drehmoment 4) Nm 19 25 31 26 27 27 33 40 36 40 40 36 40 36 27 Max. backlash/ Max. Verdrehspiel Weight of gearbox/ Getriebegewicht Axial load/ radial load (13 mm off mounting surface) 5) / Axiallast/ Radiallast (13 mm ab Flansch) 5) arcmin 15 19 kg 0.4 0.5 N 65 / 200 Data/ Technische Daten | PLG 40 LB - Ring gear made of steel/ Hohlrad aus Stahl Reduction ratio/ Untersetzungsverhältnis Efficiency of gearing parts/ Wirkungsgrad Verzahnungsteile Number of stages/ Stufenzahl - 60 80 100 120 % 91 - 3 Continuous torque 1) / Dauerdrehmoment 1) Nm 7 Continuous torque 2 )5) / Dauerdrehmoment 2) 5) Nm 20 20 20 18 Acceleration torque 3) / Beschleunigungsmoment 3) Nm 14 Emergency stop torque 4) / Not-Aus Drehmoment 4) Nm 40 40 40 36 Max. backlash/ Max. Verdrehspiel Weight of gearbox/ Getriebegewicht Axial load/ radial load (13 mm off mounting surface) 5) / Axiallast/ Radiallast (13 mm ab Flansch) 5) arcmin 22 kg 0.6 N 65 / 200 1) S8 Operation mode (alternating load) motor speed = 3000 rpm/ S8 Betriebsart (wechselnde Belastung) Motordrehzahl = 3000 rpm 2) S1 Operation mode (swelling load) gearbox output speed = 100 rpm; service lifetime check by application consulting required/ S1 Betriebsart (schwellende Belastung) Getriebeabtriebsdrehzahl = 100 rpm; Prüfung der Lebensdauer durch Applikationsberatung erforderlich 3) S8 Operating mode (alternating load); within max. 1 second/ S8 Betriebsart (wechselnde Belastung); innerhalb max. 1 Sekunde 4) Statically 100 times alternating/ Statisch 100-mal wechselnd 5) Related to gearbox output speed = 100 rpm/ Bezogen auf Getriebeabtriebsdrehzahl = 100 rpm 198 | Visit www.dunkermotoren.com for further product information/ Besuchen Sie www.dunkermotoren.de für weitere Produktinformationen
PLG 40 LB Dimensions in mm/ Maßzeichnung in mm BG 42 & 45 Length L1/ Länge L1 mm 1-stufig/ stage 39 2-stufig/ stage 52 3-stufig/ stage 64.5 Gearboxes ■ Preferred series/ Vorzugsreihe ■ Standard product/ Standardprodukt ■ On request/ auf Anfrage See notes page 8/ Hinweise siehe S. 8 Visit www.dunkermotoren.com for further product information/ Besuchen Sie www.dunkermotoren.de für weitere Produktinformationen | 199
Page 1:
BG 75 dPro PN/EC/EI Preliminary Ver
Page 4 and 5:
Who we are/ Wer wir sind Dunkermoto
Page 6 and 7:
Motion control 4.0/ Motion Control
Page 8 and 9:
Product classification/ Produktklas
Page 10 and 11:
GR/G brush type DC/ GR/G-Bürstenbe
Page 12 and 13:
BG brushless DC/ BG-Bürstenlose Gl
Page 14 and 15:
KD/DR AC motors/ KD/DR-Wechsel- Dre
Page 16 and 17:
CASM electric cylinders/ CASM-Elekt
Page 18 and 19:
Operating modes/ Betriebsarten dMov
Page 20 and 21:
Software/ Software Drive Assistant
Page 22 and 23:
Software/ Software Positioning modu
Page 24 and 25:
Software/ Software MotionCode Progr
Page 26 and 27:
Technical information/ Technische I
Page 28 and 29:
Page 30 and 31:
Page 32 and 33:
Handbook for selection of motors/ F
Page 34 and 35:
Brushed DC motors » Series GR/G Th
Page 36 and 37:
G 30.2 | cont. 4 W, peak 5 W » Mec
Page 38 and 39:
G 30.1 | G 30.1S | cont. 7 W, peak
Page 40 and 41:
G 30.1 | G 30.1S | cont. 7 W, peak
Page 42 and 43:
G 30.0 | G 30.0S | cont. 10 W, peak
Page 44 and 45:
GR 42x25 | cont. 15 W, peak 25 W »
Page 46 and 47:
GR 42x40 | cont. 21 W, peak 38 W »
Page 48 and 49:
GR 53x30 | cont. 39 W, peak 81 W »
Page 50 and 51:
GR 53x58 | cont. 61 W, peak 136 W
Page 52 and 53:
GR 63x25 | cont. 50 W, peak 119 W
Page 54 and 55:
GR 63x55 | cont. 99 W, peak 286 W
Page 56 and 57:
GR 63Sx55 | cont. 126 W, peak 368 W
Page 58 and 59:
GR 80x40 | cont. 128 W, peak 370 W
Page 60 and 61:
GR 80x80 | cont. 221 W, peak 851 W
Page 62 and 63:
Brushless DC motors » Series BG Th
Page 64 and 65:
Overview motors/ Übersicht Motoren
Page 66 and 67:
BGA 22 dCore, 8 - 24 Watt » 3-phas
Page 68 and 69:
BG 32 dCore | cont. 20 W, peak 27 W
Page 70 and 71:
BG 42 dCore | cont. 64 W, peak 156
Page 72 and 73:
BG 45 | cont. 80 W, peak 168 W » H
Page 74 and 75:
Page 76 and 77:
BG 65 | cont. 120 W, peak 260 W »
Page 78 and 79:
BG 65S | cont. 186 W, peak 470 W »
Page 80 and 81:
BG 75 | cont. 530 W, peak 1150 W »
Page 82 and 83:
Page 84 and 85:
BGA 22 dGo BG 32 KI BG 42 KI 2-wire
Page 86 and 87:
BGA 22 dGo, 8 - 24 Watt » 3-phase
Page 88 and 89:
BG 32 KI | cont. 20 W, peak 30.5 W
Page 90 and 91:
BG 42 KI | cont. 64 W, peak 110 W
Page 92 and 93:
BG 45 SI BG 45 PI/MI BG 45 CI/PB/EC
Page 94 and 95:
BG 45 SI | cont. 74 W, peak 122 W
Page 96 and 97:
BG 45 CI/PB/EC | cont. 91 W, peak 1
Page 98 and 99:
BG 45 CI/PB/EC | cont. 91 W, peak 1
Page 100 and 101:
BG 45 PI/MI | cont. 91 W, peak 159
Page 102 and 103:
BG 65 dMove | cont. 274 W, peak 327
Page 104 and 105:
BG 66 dMove | cont. 274 W, peak 327
Page 106 and 107:
BG 66 dPro CO/IO | cont. 270 W, pea
Page 108 and 109:
BG 66 dPro PN/EC/EI | cont. 270 W,
Page 110 and 111:
BG 75 dPro CO/IO | cont. 450 W, pea
Page 112 and 113:
Page 114 and 115:
BG 95 dPro CO/IO | cont. 1100 W, pe
Page 116 and 117:
Page 118 and 119:
AC motors » Series KD/DR Dunkermot
Page 120 and 121:
KD/DR 52.1-2, 20 - 22 Watt » Rugge
Page 122 and 123:
KD/DR 62.1-2, 34 - 44 Watt » Rugge
Page 124 and 125:
KD/DR 52.1-4 | 62.1-4, 5 - 15 Watt
Page 126 and 127:
KD/DR 52.0-2, 25 - 30 Watt » Rugge
Page 128 and 129:
KD/DR 62.0-2, 76 - 87 Watt » Rugge
Page 130 and 131:
KD/DR 62.0-4, 25 - 31 Watt » Rugge
Page 132 and 133:
Linear products » Series ST | CASM
Page 134 and 135:
ST 11 | cont. 19 N, peak 91 N » In
Page 136 and 137:
SCA 11 with integrated amplifier |
Page 138 and 139:
ST 25 | cont. 90 N, peak 780 N » I
Page 140 and 141:
XTR 25 | cont. 108 N, peak 860 N »
Page 142 and 143:
XT 38 | cont. 255 N, peak 1860 N »
Page 144 and 145:
Servo Tube SA/ SC 38 | cont. 615 N,
Page 146 and 147:
Accessories/ Zubehör Brake for STA
Page 148 and 149: Accessories/ Zubehör DME 230x4 »
Page 150 and 151: SM 11 | cont. 19 N, peak 92 N » Se
Page 152 and 153: SM 25 | cont. 90 N, peak 780 N » S
Page 154 and 155: XM 38 | cont. 255 N, peak 1860 N »
Page 156 and 157: LSM 06 | cont. 39 N, peak 200 N »
Page 158 and 159: LSM 13 | cont. 324 N, peak 680 N »
Page 160 and 161: LSG 13 | PLG 52 | cont. 457 N, peak
Page 162 and 163: LSG 13 | SG 62/ 80K | cont. 650 N,
Page 164 and 165: CAHB2M/L | cont. 10.000 N, peak 10.
Page 166 and 167: CASM-32 | cont. 327 N, peak 700 N
Page 172 and 173: CASM-32 CASM-32 Accessories/ Access
Page 174 and 175: Controllers » Series BGE External
Page 176 and 177: BGE 42 | 3004 A, Controller for BG
Page 178 and 179: BGE 5510 dPro CO/IO » Compact 4-qu
Page 180 and 181: BGE 5510 dPro PN/EC/EI » Compact 4
Page 182 and 183: BGE 6005 A » Very compact 4-quadra
Page 184 and 185: BGE 6010 A | BGE 6015 A » Very com
Page 186 and 187: BGE 6060 A » Compact 4-quadrant co
Page 188 and 189: DME 230x4 » Digital servocontrolle
Page 190 and 191: DME 400x8 » Digital servocontrolle
Page 192 and 193: Gearboxes/ Getriebe » Series/ Baur
Page 194 and 195: PLG 22 HT » Compact high torque pl
Page 196 and 197: PLG 32 » Compact, industry compati
Page 200 and 201: PLG 42 S » Compact, industry compa
Page 202 and 203: PLG 52 H » High efficiency » Quie
Page 204 and 205: PLG 60 LB » Low backlash servo pla
Page 206 and 207: PLG 63 EP » Industry compatible pl
Page 208 and 209: PLG 63 HT » Industry compatible hi
Page 210 and 211: PLG 75 EP » Industry compatible pl
Page 214 and 215: PLG 80 LB » Low backlash servo pla
Page 218 and 219: KG 90 » Bevel gearbox with planeta
Page 220 and 221: SG 45 » Housing made of high-tensi
Page 222 and 223: SG 65 » Housing made of high-tensi
Page 224 and 225: SG 85 » Combination with GR 53 and
Page 226 and 227: SG 120 | SG 120 H | SG 120 K Dimens
Page 228 and 229: Brakes Brushless motors series BG a
Page 230 and 231: Brakes/ Bremsen The brakes can be m
Page 232 and 233: Incremental Encoders/ Inkrementalge
Page 234 and 235: Absolute encoder/ Absolutwertgeber
Page 236 and 237: Accessories/ Zubehör | GR Our acce
Page 238 and 239: Accessories/ Zubehör | BG/BGE BG 3
Page 240 and 241: Accessories/ Zubehör | BG/BGE 5 Co
Page 242 and 243: Accessories/ Zubehör | BG/BGE 11 C
Page 244 and 245: Accessories/ Zubehör | BG/BGE 19 C
Page 246 and 247: Software/ Software 21 Starter Kit f
Page 250:
Social icon Rounded square Only use
show all

Dunkermotoren Motors Gearboxes and Controllers

Create successful ePaper yourself

Delete template?

Save as template?