Dunkermotoren Motors Gearboxes and Controllers

More documents

Recommendations

Info

CASM-40 | cont. 1020 N, peak 2375 N » Electric cylinder with strokes up to 600 mm » With brushless DC servomotors » Lead and ball screw version » Twist protected thrust rod » In-line and parallel motor version » Alternative for pneumatic cylinder » Compact and space saving » Easy configuration of max. 14 positions (PI motor) » Several BUS interfaces available » PLG 52 on request » Elektrischer Hubzylinder mit Hübe von bis zu 600 mm » Mit bürstenlosem DC-Servomotoren » Gleitspindel und Kugelrollspindel Versionen » Verdreh gesicherte Schubstange » In-Line und parallele Motorausführung » Alternative zu Pneumatik Zylinder » Kompakt und platzsparend » Einfache Konfiguration von bis zu 14 Positionen (PI Motor) » Verschiedene BUS-Schnittstellen verfügbar » Auf Anfrage mit PLG 52 ..... η IO mode CANopen version available Service interface Force mode Precise positioning Maintenance free High efficieny Low noise Self-locking ratios available High force 5 3 1 4096 IP 54S 24-48 High dynamic Digital inputs Digital outputs Analog inputs Feedback integrated Oscilloscope software available Condition monitoring Programmable Protection class (up to) Supply voltage versions Certification Certification Data/ Technische Daten Motor type/ Motortyp Nominal voltage/ Nennspannung Nominal current/ Nennstrom Peak current (2 sec.)/ Spitzenstrom (2 sec.) Spindle version/ Spindelversion Spindle pitch/ Spindelsteigung Constant force/ Dauerkraft Peak force/ Spitzenkraft Max. traverse speed/ Max. Verfahrgeschwindigkeit Max. acceleration/ Max. Beschleunigung Repeatability/ Wiederholgenauigkeit BG 65Sx50 CASM-40 BG 75x75 VDC 40-48 40-48 A 7 12.7 A 20 50 - LS BS BN LS BS BN mm 2.5 5 12.7 2.5 5 12.7 N 465 440 198 600 1020 459 N 600 1170 526 600 2375 1484 mm/s 70 300 825 70 300 825 m/s 2 1 6 1 6 mm +/- 0.07 +/- 0.01 +/- 0.07 +/- 0.01 Lifetime L 10 / Lebensdauer L 10 km 100 Siehe Diagramm 100 Siehe Diagramm Stroke length/ Hublängen mm 100 / 200 / 300 / 400 / 500 / 600 LS: Lead screw/ Gleitspindel Not applicable for motions on mechanical stop./ Nicht geeignet für Bewegungen auf mechanischem Anschlag. BS / BN: Ball screw/ Kugelrollspindel 168 | Visit www.dunkermotoren.com for further product information/ Besuchen Sie www.dunkermotoren.de für weitere Produktinformationen
CASM-40 | cont. 1020 N, peak 2375 N Dimensions/ Maßzeichnung L L Motor BG 65Sx50 Motor BG 75x75 » Motor » Motor data data 11 11 56,6 56,6 Characteristic diagram/ Belastungskennlinien @25°C 4 × †5,5 4 × M6 †5,5 Load/ linear speed diagram Load = force acting on the actuator †40 (gravity †32 force F7†40 + acceleration †32 F7 force + constant force) with BG 115,3 65Sx50 115,3 Motor Order No.: data Motor Order | BG No.: data 65Sx50 | BG PI 65Sx50 PI BG65SX50PI BG65SX50PI BLDC motor BLDC BG motor 65Sx50 BG PI65Sx50 PI BLDC with PI motor interface BLDC with BG PI motor and 65Sx50 interface brake BG | with and 65Sx50 brake PI interface | with PI and interface brake Nominal torque Nominal (100 K) and brake torque (100 K) L L M Nm M Nm0.64 0.64 3 Stall torque (20°C) Stall torque (20°C) M 0 NmM 0 Nm1.41 1.41 Connector: M12 Connector: - 5 pinM12 - 5 pin Motor data Motor data Connector: 3 M16 Connector: - 15 pin Nominal rotational M16 - 15 pin Nominal speed rotational speed ω 1/minω 1/min 3595 3595 Symbol Unit Symbol BG Unit 65Sx50 BG PI Nominal 65Sx50 PI Motor voltage Nominal BG 75x75 voltage U V DCU V DC40 40 Motor BG 65Sx50 Nominal current Nominal (100 current K) (100 K) I A I A 7 7 Nominal torque Nominal (100 torque K) (100 MK) Nm M 0.64 Nm 0.64 N65 †32 †8 N65 †32 †8 Peak Stall current torque Peak (2 Stall s) (20 current torque °C) (2 s) (20 °C) M 0 I peak Nm MA 0 I peak 1.41 Nm A 20 1.4120 Nominal rotational Nominal speed rotational speed w 1/min w 31/min 595 3 595 Lineareinheiten Max. LineareinheitenNominal output power Max. voltage Nominal output (20°C) power voltage (20°C) U P out V kW UDC P out 40V kW0.395 DC 40 0.395 201 Inertia Nominal with brake current Inertia Nominal (100 with brake current K) (100 I 201 K) J kgm AI 7 J kgm A 7 2 0.0129 25 ±1 Peak current (2 s) I 0.0129 25 ±1 Peak current (2 s) I peak A peak 20A 20 Maßzeichnung Maßzeichnung Weight Max. with output brake Weight Max. power with output brake (20 power °C) (20 P out °C) m kW Pkg out m 0.395 kW kg1.65 0.395 1.65 Inertia with Inertia brake with brake J kgm J 0.0129 kgm 2 0.0129 24 176,5 ±1 + Hub 24 176,5 ±1 + Hub Lineareinheiten Weight with Weight brake with brake m kg m 1.65 CASM–40 kg 1.65 » Cylinder data » Lineareinheiten Cylinder data Dimensions Parallel Maßzeichnung adapter Dimensions Parallel Maßzeichnung kitadapter kit for CASM-40 for and 24 CASM-40 BLDC motor and 24 BLDC BG 65S motor BG 65S †35d11 †20 †16 M12x1,25 †35d11 †20 †16 M12x1,25 30 28,5 30 28,5 21,5 21,5 †35d11 †20 †16 M12x1,25 †35d11 N53 †20 †16 M12x1,25 30 28,530 28,5 21,5 21,5 N53 11 11 Order No.: Order No.: ZBE-375574 176,5 ±1 + Hub BG 65Sx50 BG 75x75 ZBE-375574 176,5 ±1 + Hub Motor lenght/ Motorlänge L mm 140 18,4 165 18,4 16 Motor Ø/ Motor Ø mm 30 65 7 75 30 7 M6 16 N53 N53 with BG 75x75 †8h6 †40f7 CASM–40 †8h6 †40f7 Linear products 7 46,5 N54 N38 †35 4 4 7 46,5 †35 M6 16 M6 16 N54 16 14 N54 16 14 N38 N54 N38 N38 N38 System capabilities System capabilities N38 N38 N38 F peak F 1) peak m F 1) m v max v max Nuten für Näherungsschalter Nuten für Näherungsschalter CASM-40-LS CASM-40-LS 600 N bei Option 600 465 M N bei Option 465 M70 Nmm/s 70 mm/s CASM-40-BS CASM-40-BS 1 170 N 1440 170 NN 440300 N mm/s 300 mm/s CASM-40-BN CASM-40-BN 526 N 526 198 N 19825 N mm/s 825 mm/s In-line adapter In-line kitadapter kit Order No.: Order No.: Characteristic Characteristic Diagrams for CASM-40 for and CASM-40 BLDC motor Diagrams and BLDC BG 65S motor BG 65S ZBE-375571 ZBE-375571 Shear Radial load [N] load [N] Radial load [N] Nominal load [N] Shear load [N] 1000 Shear load [N] 1000 Nominal load Nominal [N] 2500 load [N] 2500 M6 N54 M6 N54 53,5 M6 53,5 Bestellcode Bestellcode M6 1) Mean load over 1) full Mean cycle. load For over more full information cycle. For more please information visit skf.com/casm please visit skf.com/casm M6 M6 M6 M6 Nuten für Näherungsschalter Nuten für Näherungsschalter bei Option M bei Option M Linear Unit Lifetime Linear Chart Unit Lifetime Chart Nuten für Näherungsschalter Nuten für Näherungsschalter bei Option M bei Option M Brake 2000 2000 Brake Radial load [N] 100 †45 Radial load [N] 100 †45 Typ Typ †5,3 †5,3 CASM-40 CASM-40 Bestellcode Bestellcode 25 25 Gewindetrieb: Gewindetrieb: System capabilities 1000 System capabilities 1000 35 35Gleitspindel 12x2,5 Gleitspindel mm 12x2,5 mm LS 10 LS 10 Kugelrollspindel Kugelrollspindel 12x5 mm 12x5 mm F peak F 1) peak m F 1) m V max BS V max BS Kugelrollspindel Kugelrollspindel 12,7x12,7 mm12,7x12,7 mm BN BN 500 500 CASM-40-BN CASM-40-BN Hub: Hub: C A SCASM-40-LS M C – A 4S CASM-40-LS 0 M – 4 0 – 0600 N – 0600 465 A N 465 – 700 A Nmm/s 0 0 CASM-40-BS – 700 mm/s 0 0 100 mm CASM-40-BS 100 mm CASM-40-BS CASM-40-BS 1 170 N 1440 170 NN 440300 N mm/s 300 mm/s 100 Typ 200 mm Typ 200 mm 1 CASM-40-BN 0CASM-40-BN 526 N 526 198 N 19825 N mm/s 200 1 0 825 mm/s 0 100 200 0 100 300 200 400 300 500 300 400 600 mm500 700 300 600 mm700 0 1000 20000 3000 1000 4000 2000 5000 3000 6000 4000 7000 5000 8000 6000 9000 7000 10000 Shear load diagram 8000 9000 10000 300 Position [mm] [mm] The shear Gewindetrieb: load acts 400 Gewindetrieb: at right angles to the movement direction. Position 400 [mm] Position [mm] Lifetime [Km] 400 1) 500 mm Lifetime 1) 500 mm Mean load diagram Lifetime [Km] over full Mean cycle. load For over more full information cycle. For more please information visit skf.com/casm please visit skf.com/casm 500 Gleitspindel 12x2,5 Gleitspindel mm 12x2,5 mm LS ® SKF is a registered trademark of the SKF Group. Kugelrollspindel 12x5 mm 600 mm LS Lifetime L10 [km] Lifetime L10 [km] ® SKF Shear is a registered load diagram Shear trademark load of diagram the SKF Group. 600 mm Lifetime diagram Lifetime diagram 600 Kugelrollspindel 12x5 mm CASM-40-BS BS CASM-40-BS BS CASM-40-BN CASM-40-BN © SKF The Group shear 2014 load © SKF The acts Group shear at right 2014 load angles acts at to right the angles movement to the direction. Kugelrollspindel movement direction. The contents of this Kugelrollspindel 12,7x12,7 mm 12,7x12,7 mm BN The publication contents of are this the publication copyright are of the publisher Optionen copyright of the publisher 1) : Optionen 1) : BN and may not be reproduced and may not (even be reproduced extracts) unless (even extracts) prior written unless prior Motor, written Adapter Motor, und Anbauteile Adapter und separat Anbauteile geliefert separat geliefert permission Hub: is granted. permission Hub: Every is care granted. has been Every taken care to has ensure Visit been www.dunkermotoren.com the taken to ensure Motor, the Adapter for Motor, und further Fussmontagewinkel Adapter product und information/ Fussmontagewinkel 2) Besuchen vormontiert Sie 2) (Siehe www.dunkermotoren.de vormontiert Position (Siehe der Nuten Position für weitere auf der obenstehender Nuten Produktinformationen auf obenstehender Zeichnung) | 169 Zeichnung) accuracy 100 of mm the information accuracy 100 of mm contained the information this contained publication in but this no Screw publication but no 100 Screw 100 liability can type be accepted liability can for any type be accepted loss or damage for any whether loss or damage direct, Stroke whether direct, Stroke ■ Preferred series/ Vorzugsreihe ■ Standard product/ Standardprodukt ■ On request/ auf Anfrage See notes page 8/ Hinweise siehe S. 8 Nominal load [N] 1500 Nominal load [N] 1500 C A S M C– A4S0 M –– 4 0 –– 0 – 0
Page 1:
BG 75 dPro PN/EC/EI Preliminary Ver
Page 4 and 5:
Who we are/ Wer wir sind Dunkermoto
Page 6 and 7:
Motion control 4.0/ Motion Control
Page 8 and 9:
Product classification/ Produktklas
Page 10 and 11:
GR/G brush type DC/ GR/G-Bürstenbe
Page 12 and 13:
BG brushless DC/ BG-Bürstenlose Gl
Page 14 and 15:
KD/DR AC motors/ KD/DR-Wechsel- Dre
Page 16 and 17:
CASM electric cylinders/ CASM-Elekt
Page 18 and 19:
Operating modes/ Betriebsarten dMov
Page 20 and 21:
Software/ Software Drive Assistant
Page 22 and 23:
Software/ Software Positioning modu
Page 24 and 25:
Software/ Software MotionCode Progr
Page 26 and 27:
Technical information/ Technische I
Page 28 and 29:
Page 30 and 31:
Page 32 and 33:
Handbook for selection of motors/ F
Page 34 and 35:
Brushed DC motors » Series GR/G Th
Page 36 and 37:
G 30.2 | cont. 4 W, peak 5 W » Mec
Page 38 and 39:
G 30.1 | G 30.1S | cont. 7 W, peak
Page 40 and 41:
G 30.1 | G 30.1S | cont. 7 W, peak
Page 42 and 43:
G 30.0 | G 30.0S | cont. 10 W, peak
Page 44 and 45:
GR 42x25 | cont. 15 W, peak 25 W »
Page 46 and 47:
GR 42x40 | cont. 21 W, peak 38 W »
Page 48 and 49:
GR 53x30 | cont. 39 W, peak 81 W »
Page 50 and 51:
GR 53x58 | cont. 61 W, peak 136 W
Page 52 and 53:
GR 63x25 | cont. 50 W, peak 119 W
Page 54 and 55:
GR 63x55 | cont. 99 W, peak 286 W
Page 56 and 57:
GR 63Sx55 | cont. 126 W, peak 368 W
Page 58 and 59:
GR 80x40 | cont. 128 W, peak 370 W
Page 60 and 61:
GR 80x80 | cont. 221 W, peak 851 W
Page 62 and 63:
Brushless DC motors » Series BG Th
Page 64 and 65:
Overview motors/ Übersicht Motoren
Page 66 and 67:
BGA 22 dCore, 8 - 24 Watt » 3-phas
Page 68 and 69:
BG 32 dCore | cont. 20 W, peak 27 W
Page 70 and 71:
BG 42 dCore | cont. 64 W, peak 156
Page 72 and 73:
BG 45 | cont. 80 W, peak 168 W » H
Page 74 and 75:
Page 76 and 77:
BG 65 | cont. 120 W, peak 260 W »
Page 78 and 79:
BG 65S | cont. 186 W, peak 470 W »
Page 80 and 81:
BG 75 | cont. 530 W, peak 1150 W »
Page 82 and 83:
Page 84 and 85:
BGA 22 dGo BG 32 KI BG 42 KI 2-wire
Page 86 and 87:
BGA 22 dGo, 8 - 24 Watt » 3-phase
Page 88 and 89:
BG 32 KI | cont. 20 W, peak 30.5 W
Page 90 and 91:
BG 42 KI | cont. 64 W, peak 110 W
Page 92 and 93:
BG 45 SI BG 45 PI/MI BG 45 CI/PB/EC
Page 94 and 95:
BG 45 SI | cont. 74 W, peak 122 W
Page 96 and 97:
BG 45 CI/PB/EC | cont. 91 W, peak 1
Page 98 and 99:
BG 45 CI/PB/EC | cont. 91 W, peak 1
Page 100 and 101:
BG 45 PI/MI | cont. 91 W, peak 159
Page 102 and 103:
BG 65 dMove | cont. 274 W, peak 327
Page 104 and 105:
BG 66 dMove | cont. 274 W, peak 327
Page 106 and 107:
BG 66 dPro CO/IO | cont. 270 W, pea
Page 108 and 109:
BG 66 dPro PN/EC/EI | cont. 270 W,
Page 110 and 111:
BG 75 dPro CO/IO | cont. 450 W, pea
Page 112 and 113:
Page 114 and 115:
BG 95 dPro CO/IO | cont. 1100 W, pe
Page 116 and 117:
Page 118 and 119: AC motors » Series KD/DR Dunkermot
Page 120 and 121: KD/DR 52.1-2, 20 - 22 Watt » Rugge
Page 124 and 125: KD/DR 52.1-4 | 62.1-4, 5 - 15 Watt
Page 132 and 133: Linear products » Series ST | CASM
Page 134 and 135: ST 11 | cont. 19 N, peak 91 N » In
Page 136 and 137: SCA 11 with integrated amplifier |
Page 138 and 139: ST 25 | cont. 90 N, peak 780 N » I
Page 140 and 141: XTR 25 | cont. 108 N, peak 860 N »
Page 142 and 143: XT 38 | cont. 255 N, peak 1860 N »
Page 144 and 145: Servo Tube SA/ SC 38 | cont. 615 N,
Page 146 and 147: Accessories/ Zubehör Brake for STA
Page 148 and 149: Accessories/ Zubehör DME 230x4 »
Page 150 and 151: SM 11 | cont. 19 N, peak 92 N » Se
Page 152 and 153: SM 25 | cont. 90 N, peak 780 N » S
Page 154 and 155: XM 38 | cont. 255 N, peak 1860 N »
Page 156 and 157: LSM 06 | cont. 39 N, peak 200 N »
Page 158 and 159: LSM 13 | cont. 324 N, peak 680 N »
Page 160 and 161: LSG 13 | PLG 52 | cont. 457 N, peak
Page 162 and 163: LSG 13 | SG 62/ 80K | cont. 650 N,
Page 164 and 165: CAHB2M/L | cont. 10.000 N, peak 10.
Page 166 and 167: CASM-32 | cont. 327 N, peak 700 N
Page 170 and 171: CASM-63 | cont. 583 N, peak 1885 N
Page 172 and 173: CASM-32 CASM-32 Accessories/ Access
Page 174 and 175: Controllers » Series BGE External
Page 176 and 177: BGE 42 | 3004 A, Controller for BG
Page 178 and 179: BGE 5510 dPro CO/IO » Compact 4-qu
Page 180 and 181: BGE 5510 dPro PN/EC/EI » Compact 4
Page 182 and 183: BGE 6005 A » Very compact 4-quadra
Page 184 and 185: BGE 6010 A | BGE 6015 A » Very com
Page 186 and 187: BGE 6060 A » Compact 4-quadrant co
Page 188 and 189: DME 230x4 » Digital servocontrolle
Page 190 and 191: DME 400x8 » Digital servocontrolle
Page 192 and 193: Gearboxes/ Getriebe » Series/ Baur
Page 194 and 195: PLG 22 HT » Compact high torque pl
Page 196 and 197: PLG 32 » Compact, industry compati
Page 198 and 199: PLG 40 LB » Low backlash servo pla
Page 200 and 201: PLG 42 S » Compact, industry compa
Page 202 and 203: PLG 52 H » High efficiency » Quie
Page 206 and 207: PLG 63 EP » Industry compatible pl
Page 208 and 209: PLG 63 HT » Industry compatible hi
Page 210 and 211: PLG 75 EP » Industry compatible pl
Page 218 and 219:
KG 90 » Bevel gearbox with planeta
Page 220 and 221:
SG 45 » Housing made of high-tensi
Page 222 and 223:
SG 65 » Housing made of high-tensi
Page 224 and 225:
SG 85 » Combination with GR 53 and
Page 226 and 227:
SG 120 | SG 120 H | SG 120 K Dimens
Page 228 and 229:
Brakes Brushless motors series BG a
Page 230 and 231:
Brakes/ Bremsen The brakes can be m
Page 232 and 233:
Incremental Encoders/ Inkrementalge
Page 234 and 235:
Absolute encoder/ Absolutwertgeber
Page 236 and 237:
Accessories/ Zubehör | GR Our acce
Page 238 and 239:
Accessories/ Zubehör | BG/BGE BG 3
Page 240 and 241:
Accessories/ Zubehör | BG/BGE 5 Co
Page 242 and 243:
Accessories/ Zubehör | BG/BGE 11 C
Page 244 and 245:
Accessories/ Zubehör | BG/BGE 19 C
Page 246 and 247:
Software/ Software 21 Starter Kit f
Page 250:
Social icon Rounded square Only use
show all

Dunkermotoren Motors Gearboxes and Controllers

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?