Dunkermotoren Motors Gearboxes and Controllers
- No tags were found...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
XM 38 | cont. 255 N, peak 1860 N<br />
Module length & travel/ Modullänge & Verfahrwege<br />
Length (mm)/ Länge (mm) 3804 3806 3808 3810<br />
1015 717 646 575 504<br />
1051 753 682 611 540<br />
1086 788 717 646 575<br />
1122 824 753 682 611<br />
1158 860 789 718 647<br />
1193 895 824 753 682<br />
1229 931 860 789 718<br />
1264 966 895 824 753<br />
MAGNETIC THRUST ROD<br />
(NOT LOAD BEARING)<br />
1300 1002 931 860 789<br />
1336 1038 967 896 825<br />
1371 1073 1002 931 860<br />
1407<br />
CABLES:<br />
1109 1038 967 896<br />
THRUST ROD<br />
1. Ø7.6<br />
1443<br />
POWER CABLE<br />
1145 SUPPORT 1074 1003 932<br />
2. Ø5.8 SENSOR CABLE<br />
3. Ø4.5 1478 ENCODER CABLE (OPTIONAL) 1180 1109 1038 967<br />
1514 1216 1145 1074 1003<br />
1550 1252<br />
BEARING1181 1110 1039<br />
1585 1287<br />
LUBRICATION PORT<br />
1216 1145 1074<br />
1621<br />
84.0<br />
1323 1252 1181 1110<br />
60.0<br />
* Longer modules depending on D the application possible (max. ~ 1800 mm)./ * Längere Module je nach Applikation möglich ( max. ~ 2100 mm)<br />
FORCER<br />
D<br />
AL)<br />
Dimensions in mm/ Maßzeichnung in mm<br />
38.0<br />
THRUST 0.5ROD<br />
EACH SUPPORT END<br />
10.5<br />
BEARING<br />
LUBRICATION PORT<br />
85<br />
FORCER<br />
DRAG MAGNETIC CHAIN THRUST ROD<br />
FOR CABLE (NOT ROUTING LOAD BEARING)<br />
(LARGER SIZE OPTIONAL)<br />
AL)<br />
76<br />
0mm<br />
OKE<br />
6.2<br />
90<br />
B<br />
(FOR LARGER DRAG CHAIN)<br />
DETAIL B<br />
DETAIL C<br />
DETAIL D<br />
50<br />
S)<br />
(ORDER REF. I3)<br />
2.0<br />
2.0<br />
A<br />
(RUBBER BUFFER)<br />
(RUBBER BUFFER)<br />
LINEAR ENCODER (OPTIONAL)<br />
SLOTS FOR M5 T-NUTS &<br />
SLOTS FOR M4 SQUARE NUTS<br />
SLOTS FOR M6 T-NUTS &<br />
DATUM ACTUATION AT 20mm<br />
FROM END OF STROKE<br />
M6 SQUARE / HEX. NUTS<br />
STANDARD SYSTEM LENGTH M8 338mm SQUARE MIN. TO / 1621mm HEX. NUTS MAX. DRAG CHAIN<br />
FOR CABLE ROUTING<br />
86<br />
SYSTEM LENGTH ( 0.5) = STROKE REQUIRED + FORCER SYSTEM LENGTH CLAMPS + 76.0mm (THRUST (LARGER ROD SIZE SUPPORTS) OPTIONAL)<br />
DR00101-D XM38xx MODULE INSTALLATION DIMENSIONS + 4.0mm (RUBBER BUFFERS) [+10.0mm (MOUNTED FOR LIMIT NOT SWITCHES]<br />
LESS<br />
102 (CLAMP BOLT CENTRES)<br />
.8<br />
14.0<br />
THAN 150mm APART)<br />
SECTION A-A<br />
EACH SIDE, IF REQUIRED<br />
2.5<br />
8.2<br />
DESIGN COPYRIGHT CUSTOMER ADJUSTABLE LIMIT<br />
C RESERVED 2011 SWITCHES (OPTIONAL)<br />
38.0<br />
A<br />
FORCER C L LENGTH<br />
FACTORY SET FOR 5.0mm FROM<br />
38<br />
ALL DIMENSIONS IN MM<br />
1 2 3<br />
0.5<br />
END OF STROKE<br />
TOLERANCES UNLESS<br />
EACH END<br />
4.8<br />
OTHERWISE STATED<br />
10.5<br />
X 0.50mm<br />
2.5<br />
X.X 0.20mm<br />
X.XX 0.10mm<br />
X.XXX 0.05mm<br />
WOLLASTON WAY<br />
ANGULAR 5<br />
BURNT MILLS, BASILDON<br />
AIL C<br />
DETAIL D<br />
ESSEX, SS13 1DJ, ENGLAND<br />
SHEET SIZE: A3<br />
Tel: (0)1268 287070, Fax: (0)1268 928372<br />
4 SQUARE NUTS<br />
SLOTS FOR M6 T-NUTS &<br />
SCALE: 1:2<br />
M8 SQUARE / HEX. NUTS<br />
XM38xx MODULE INSTALLATION DIMENSIONS<br />
SHEET: 1 of 1<br />
6.2<br />
QT00006/H<br />
(OPTIONAL)<br />
76<br />
ATION AT 20mm<br />
DETAIL B<br />
DETAIL C<br />
END OF STROKE<br />
T CENTRES)<br />
N A-A<br />
5.2<br />
4.8<br />
DETAIL C<br />
2.5<br />
8.2<br />
TS FOR M4 SQUARE NUTS<br />
NSIONS<br />
8.2<br />
38<br />
13.0<br />
11.8<br />
1<br />
6.8<br />
110<br />
9.0<br />
73<br />
90<br />
(FOR LARGER DRAG CHAIN)<br />
(ORDER REF. I3)<br />
13.0<br />
11.8<br />
4.5<br />
38.5<br />
6.8<br />
21<br />
BEARING<br />
LUBRICATION PORT<br />
2 3<br />
THRUST ROD<br />
SUPPORT<br />
14.0<br />
8.2<br />
C<br />
109.0<br />
0.5 NOM.<br />
DETAIL D<br />
SLOTS FOR M6 T-NUTS &<br />
M8 SQUARE / HEX. NUTS<br />
B<br />
109.0<br />
0.5 NOM.<br />
50<br />
LINEAR ENCODER (OPTIONAL)<br />
DATUM ACTUATION AT 20mm<br />
FROM END OF STROKE<br />
86<br />
102 (CLAMP BOLT CENTRES)<br />
85<br />
FORCER<br />
SECTION A-A<br />
A<br />
5.2<br />
4.8<br />
2.5<br />
8.2<br />
A<br />
38<br />
MAGNETIC THRUST ROD<br />
(NOT LOAD BEARING)<br />
76<br />
90<br />
(FOR LARGER DRAG CHAIN)<br />
(ORDER REF. I3)<br />
SYSTEM CLAMPS<br />
(MOUNTED NOT LESS<br />
THAN 150mm APART)<br />
EACH SIDE, IF REQUIRED<br />
13.0<br />
11.8<br />
1<br />
6.8<br />
2 3<br />
FORCER LENGTH<br />
DR00101<br />
DOCUMENT No.<br />
D (07.08.12)<br />
ISSUE:<br />
14.0<br />
8.2<br />
2.0<br />
(RUBBER BUFFER)<br />
STANDARD SYSTEM LENGTH 338mm MIN. TO 1621mm MAX.<br />
SLOTS FOR M5 T-NUTS &<br />
SLOTS FOR M4 SQUARE NUTS<br />
M6 SQUARE / HEX. NUTS<br />
2.0<br />
DR00101-D XM38xx (RUBBER MODULE BUFFER) INSTALLATION DIMENSIONS<br />
SYSTEM LENGTH ( 0.5) = STROKE REQUIRED + FORCER LENGTH + 76.0mm (THRUST ROD SUPPORTS)<br />
+ 4.0mm (RUBBER BUFFERS) [+10.0mm FOR LIMIT SWITCHES]<br />
Length/ Länge mm With buffers/ Mit Puffer Approximate module mass/ Ungefähres Modulgewicht kg<br />
XM 3804 218<br />
C L 222<br />
C<br />
DESIGN COPYRIGHT<br />
RESERVED 2011<br />
4.26 + (0.01563 x system length in mm)<br />
DR00101<br />
XM 3806 289 293 OTHERWISE 5.23 STATED + (0.01563 x system length in mm)<br />
XM 3808 360 364 X.XX 0.10mm 6.21 + (0.01563 x system length in mm)<br />
DOCUMENT No.<br />
D (07.08.12)<br />
XM 3810<br />
BURNT MILLS, BASILDON<br />
ESSEX, 431SS13 1DJ, ENGLAND 435 7.19 + (0.01563 x system length in mm)<br />
SHEET SIZE: A3<br />
ISSUE:<br />
0.5<br />
EACH END<br />
109.0<br />
0.5 NOM.<br />
WOLLASTON WAY<br />
85<br />
38.0<br />
CABLES:<br />
1.<br />
2.<br />
3.<br />
CUSTOMER ADJUSTABLE LIMIT<br />
SWITCHES (OPTIONAL)<br />
FACTORY SET FOR 5.0mm FROM<br />
END OF STROKE<br />
Tel: (0)1268 287070, Fax: (0)1268 928372<br />
SCALE:<br />
XM38xx MODULE INSTALLATION DIMENSIONS<br />
SHEET:<br />
Doc. 60.0 No. DR00101<br />
ALL DIMENSIONS IN MM<br />
TOLERANCES UNLESS<br />
QT00006/H<br />
Visit www.dunkermotoren.com for further product information/ Besuchen Sie www.dunkermotoren.de für weitere Produktinformationen | 155<br />
A<br />
A<br />
84.0<br />
X<br />
X.X<br />
0.50mm<br />
0.20mm<br />
X.XXX 0.05mm<br />
ANGULAR 5<br />
1:2<br />
1 of 1<br />
SYSTEM CLAMPS<br />
(MOUNTED NOT LESS<br />
THAN 150mm APART)<br />
EACH SIDE, IF REQUIRED<br />
2.0<br />
(RUBBER BUFFER)<br />
FORCER LENGTH<br />
DRAG CHAIN<br />
FOR CABLE ROUTING<br />
(LARGER SIZE OPTIONAL)<br />
STANDARD SYSTEM LENGTH 338mm MIN. TO 1621mm MAX.<br />
CUSTOMER A<br />
SWITCHES (O<br />
FACTORY SET<br />
END OF STROFO<br />
Linear products<br />
2.0<br />
(RUBBER BUFFER)<br />
SYSTEM LENGTH ( 0.5) = STROKE REQUIRED + FORCER LENGTH + 76.0mm (THRUST ROD<br />
+ 4.0mm (RUBBER BUFFERS) [+10.0mm FOR LIMIT SWITCHES]<br />
110<br />
Doc. No.<br />
9.0<br />
73<br />
Ø7.6 POWER CABLE<br />
Ø5.8 SENSOR CABLE<br />
Ø4.5 ENCODER CABLE (OPTIONAL)<br />
4.5<br />
38.5<br />
DR00101<br />
21<br />
C<br />
D<br />
5.2<br />
8.2<br />
38<br />
DR00101<br />
DOCUMENT No.<br />
ISSUE: D (07.08.12)<br />
1<br />
THRUST ROD<br />
SUPPORT<br />
BEARING<br />
LUBRICATION PORT<br />
WOLLASTON WAY<br />
BURNT MILLS, BASILDON<br />
ESSEX, SS13 1DJ, ENGLAND<br />
S<br />
76<br />
Tel: (0)1268 287070, Fax: (0)1268 928372<br />
S<br />
XM38xx MODULE INSTALLATION DIMENSIONS<br />
90<br />
S<br />
(FOR LARGER DRAG CHAIN)<br />
(ORDER REF. I3)<br />
13.0<br />
11.8<br />
6.8<br />
2 3<br />
14.0<br />
8.2<br />
DETAIL D<br />
C L<br />
SLOTS FOR M6 T-NUTS &<br />
M8 SQUARE / HEX. NUTS<br />
0.5<br />
EACH END<br />
109.0<br />
0.5 NOM.<br />
85<br />
38.0<br />
A<br />
SYSTEM L
Change language