Delivery Program 12-2021
Delivery Program HP-Textiles GmbH 12-2021
Delivery Program HP-Textiles GmbH 12-2021
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Peel Ply / Tear-Off Fabric<br />
The Peel Ply has been well-known in aircraft construction for many years. It is made of Nylon and is added into<br />
epoxy– or polyester resins as the first and/or final layer of the construction.<br />
After hardening, just before further processing it has to be peeled off slowly and in a sharp angle.<br />
This result is an overall rough, bondable upper surface free from lubricating film. Sanding or cleaning of the surface<br />
is not necessary before sticking or coating.<br />
The Peel Ply can‘t remain in the construction therefore a red or blue tracer thread is woven into the fabric.<br />
Advantages of working with Peel Ply Fabrics:<br />
• Accurate upper surface<br />
• A bit rough after tearing off, absolutely clean and free of dust<br />
• Ideal subsoil for bonding or further laminating / painting<br />
• Saves time, no need to grind with sand-paper or removing of grinding dust<br />
In some cases slip resistant components are required (e.g. stand space of surf boards, boat decks). After tearing<br />
off the Peel Ply the surface is ready for use.<br />
ARTICLE<br />
WEIGHT<br />
g/m²<br />
WEAVE<br />
STYLE<br />
THREADS/cm<br />
Warp / Weft<br />
YARN TYPE<br />
Warp/Weft<br />
WIDTH<br />
cm<br />
FIBRE<br />
TYPE<br />
HEAT<br />
RESISTANT<br />
HP-P83P3 83 Plain<br />
19 x 16 235 dTex 3 Nylon 6.6 170 °C<br />
HP-P83P4 83 Plain<br />
19 x 16 235 dTex 4 Nylon 6.6 170 °C<br />
HP-P83P5 83 Plain<br />
19 x 16 235 dTex 5 Nylon 6.6 170 °C<br />
HP-P83P8 83 Plain<br />
19 x 16 235 dTex 8 Nylon 6.6 170 °C<br />
HP-P83P10 83 Plain<br />
19 x 16 235 dTex 10 Nylon 6.6 170 °C<br />
HP-P83P15 83 Plain<br />
19 x 16 235 dTex 15 Nylon 6.6 170 °C<br />
HP-P83P20 83 Plain<br />
19 x 16 235 dTex 20 Nylon 6.6 170 °C<br />
HP-P83P60 83 Plain<br />
19 x 16 235 dTex 60 Nylon 6.6 170 °C<br />
HP-P83P60RB 83 Plain<br />
19 x 14 235 dTex 60 PA 6.6 200 °C<br />
HP-P83P100 83 Plain<br />
19 x 16 235 dTex 100 Nylon 6.6 170 °C<br />
HP-P83P100RB 83 Plain<br />
19 x 14 235 dTex 100 PA 6.6 200 °C<br />
HP-P83P150 83 Plain<br />
19 x 16 235 dTex 150 Nylon 6.6 170 °C<br />
HP-T105P25 105 Twill<br />
21 x 21 235 dTex 25 Nylon 6.6 170 °C<br />
HP-T105P100 105 Twill<br />
21 x 21 235 dTex 100 Nylon 6.6 170 °C<br />
HP-T105P<strong>12</strong>5 105 Twill<br />
21 x 21 235 dTex <strong>12</strong>5 Nylon 6.6 170 °C<br />
Vacuum Technology<br />
Different weights, constructions and widths are available upon request!<br />
1. Introduce the Peel Ply as the<br />
last layer<br />
2. After curing tear off the Peel Ply<br />
fabric<br />
3. Ideal surface for further works<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com 37