Delivery Program 12-2021
Delivery Program HP-Textiles GmbH 12-2021
Delivery Program HP-Textiles GmbH 12-2021
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Mold and Casting Resins<br />
EP-Casting Resin System - Semi-Transparent - HP-E45GA<br />
The Epoxy-System HP-E45GA is an unfilled, medium-viscous combination of resin and hardener with processing<br />
time (pot life) of approx. 45 minutes.*<br />
Usable for epoxy casting of medium thickness (up to approx. 20mm*)<br />
HP-E45GA is free of nonylphenol and contains no active diluents!<br />
Features and Benefits:<br />
• Semi-transparent, low shrink-casting with tacky-free surfaces<br />
• Good flow behaviour (medium-viscous)<br />
• Cold-hardening, demouldable at room-temperature<br />
• High fillable casting resin<br />
• The results are pressure-resistant and impact-resistant (tough) moulds / components with high strength<br />
Industrial Modelling / Hobby Modelling / Boatbuilding:<br />
• Foundry patterns, die plates, reproduction patterns<br />
• Building of small moulds and castings with slightly yellow colour<br />
• Encapsulation of decorative elements<br />
• Levelling compound<br />
• Dielectric resin for electrical embedding up to 48 Volts<br />
Product Properties: Resin Hardener<br />
HP-E45GA<br />
Colouring transparent yellowish<br />
Mixing ratio<br />
weight 100 60<br />
Mixed viscosity<br />
medium viscous<br />
Pot life (100g at 20°C) minutes<br />
45<br />
Demouldable after* (at 20°C) hours<br />
< <strong>12</strong><br />
Demouldable after (at 30°C) hours<br />
< 6<br />
Processing temperature (optimum) °C<br />
15 - 25<br />
* Depends on geometry and total amount of casting. Specifications after hardening 7d at 20°C.<br />
Technical<br />
Data Sheet<br />
Online Shop<br />
86<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com