Delivery Program 12-2021

More documents

Recommendations

Info

Overview Epoxy Resin Systems Products PRIMING FILLING COATING PROTECT SEALING HP-E35GS 2K Epoxy Primer ++ - - - - HP-E30S 2K Epoxy Filler - ++ - - - HP-E30RB 2K Epoxy Roll Coating - - ++ ++ - HP-E30VB 2K Epoxy Levelling Coating - - ++ ++ - HP-E40KS 2K Epoxy Corrosion protection - - - ++ ++ BM-E25F 2K Epoxy Paving joint mortar - - - - ++ BM-E45F 2K Epoxy Paving joint mortar - - - - ++ HP-EW60F 2K Epoxy Paving joint mortar - - - - ++ ++ = very good applicable + = applicable o = conditionally applicable - = not provided Epoxy Resin Systems 1 2 System structure Article Consumption 1 Primer E35GS ca. 150 - 250 g/m² 2 Roll Coating E30RB ca. 400 - 600 g/m² 70 phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com
FEATURES CHEMICAL RESISTANCE VISCOSITY POT LIFE TEMPERATURES the higher, the thicker min. at 20°C … processing minimum(recommended) … loadability (Tg MAX in °C) Priming of mineral / porous substrates, + XB thinner for deep impregnation. Water barrier layer high low 35 10 (20°C) 150 - 250 g/m² Filler with fine fillers, grindable, semi-flexible high pasty 30 15 (20°C) as needed Floor and wall coating, brushable & rollable, high abrasion resistance, easy to clean very high viscous 30 15 (20°C) 400 - 600 g/m² Floor and wall coating, self-levelling, high abrasion resistance, easy to clean very high viscous 30 15 (20°C) 2 - ≥ 5 kg/m² Very good chemical resistance, protection against many acids / alkalis very high viscous 30 15 (18 - 25°C) 250 - 400 g/m² Paving joint mortar Dry process high low Paving grout, Dry process high low 25 5 (10 - 25°C) 45 15 - 25 °C 1,6kg to 25kg sand with approx. 0.7 - 1.3mm grain size 1,6kg to 25kg sand with approx. 0.7 - 1.3mm grain size Paving grout, Mudding method high medium viscosity 60 15 - 25 °C 2kg to 25kg sand with approx. 0.7 - 1.3mm grain size Rev. 21.01 1 2 3 Epoxy Resin Systems System structure Article Consumption 1 Primer E35GS ca. 150 - 250 g/m² 2 Filler System E30S As needed 3 Levelling Coating E30VB ca. 2 - ≥ 5 kg/m² phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com 71
Page 1 and 2:
... light up your future !!! Produc
Page 3:
Category Page Category Page Reinfor
Page 6 and 7:
6Reinforcement Fabrics Carbon Fibre
Page 8 and 9:
8Reinforcement Fabrics Overview Mul
Page 10 and 11:
Reinforcement Fabrics Carbon Fabric
Page 13 and 14:
Carbon-Design-Fabric -with UV-resis
Page 15 and 16:
Design-Fabric Our design fabrics ha
Page 17:
Aramid Tapes Our Fabric-Tapes are m
Page 21 and 22: Glass Filament Fabric - Silane - AR
Page 23 and 24: Glass Fibre Braided Sleeve Glass fi
Page 25 and 26: Multiaxial Glass Fabrics Non-woven
Page 27 and 28: C-Glass Non Woven The non-woven C-G
Page 30 and 31: 3D|CORE TM 3D|CORE is a structure r
Page 32 and 33: 3D|CORE TM XPS 3D | CORE is a Stru
Page 35 and 36: ADHESIVE GLASS FIBRE TAPE PUSH CONN
Page 37 and 38: Peel Ply / Tear-Off Fabric The Peel
Page 39 and 40: Polyester Non-Woven Absorber The no
Page 41 and 42: “Double Sided” Adhesive Fibre G
Page 43 and 44: MTI ® VALVE - Automatic Valve for
Page 45 and 46: PU Vacuum-Hose - Flexible - PU hose
Page 47 and 48: phone: +49 (0) 5905-9459870 www.hp-
Page 49: Vacuum Pump 220V / 750W Compact, lo
Page 52 and 53: Epoxy Resin Systems LAMINATING PRIM
Page 54 and 55: PUR-Priming Resin for EP-Resins ▪
Page 56 and 57: Epoxy Adhesive System ▪ HP-E5K /
Page 58 and 59: High Strength Thermosetting Resin
Page 60 and 61: Multi-purpose Resin System ▪ BM-E
Page 62 and 63: High Heat Resistant Epoxy System
Page 64 and 65: Infusion-Resin / Laminating Resin 1
Page 66 and 67: Covering and Laminating Epoxy-Syste
Page 68 and 69: Covering Resin Systems ▪ HP-E25D
Page 72 and 73: Epoxy Primer ▪ HP-E35GS The Epoxy
Page 74 and 75: Roller Coating Epoxy-System ▪ HP-
Page 76 and 77: EP resin system paving joint mortar
Page 78 and 79: EP resin system paving joint mortar
Page 81 and 82: SILICONE SILICONE MOLD MATERIAL ADD
Page 83 and 84: Epoxy Mould Covering Resin ▪ HP-E
Page 85 and 86: Epoxy Casting Resin System -Transpa
Page 87 and 88: EP-Casting Resin System - residuall
Page 89 and 90: Casting Resin System - electronic-c
Page 91 and 92: Polyurethane flexibal Casting Resin
Page 94 and 95: Polyester Resin Systems Polyester r
Page 96: TOPCOAT POLYURETHAN IN-MOULD COATIN
Page 99 and 100: Features and Benefits: • High qua
Page 101 and 102: Available colours: RAL1000 C RAL102
Page 103 and 104: Colour Pastes, metallic ▪ HP-FMP
Page 105 and 106: Transparent colourant (liquid) ▪
Page 108 and 109: Mould Release Agents Mould release
Page 110 and 111: CLEANSER / THINNER
Page 112: UV-STABILITY COTTON FLOCKS DEGASSIN
Page 115 and 116: DOSAGE BULK WEIGHT FEATURES /BENEFI
Page 117 and 118: HP-BEL81: Matting Agent • Liquid
Page 120 and 121:
Degasser Roller Degasser rollers ar
Page 122 and 123:
Tools / Accessories Article DESCRIP
Page 124 and 125:
Ordering Information ORDERING INFOR
Page 126 and 127:
Practical Tips On our website (Vide
Page 128:
Your system supplier for (fibre) co
show all

Delivery Program 12-2021

Create successful ePaper yourself

Delete template?

Save as template?