Delivery Program 12-2021
Delivery Program HP-Textiles GmbH 12-2021
Delivery Program HP-Textiles GmbH 12-2021
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Epoxy Casting Resin System -Transparent- HP-E300GB<br />
The Epoxy-System HP-E300GB is an unfilled, low-viscous combination of resin and hardener with processing<br />
time (pot life) of more than 300 minutes.*<br />
Usable for epoxy casting of medium thickness (up to approx. 30mm*) and slightly increased temperatures.*<br />
HP-E300GB is free of nonylphenol and contains no active diluents!<br />
Mold and Casting Resins<br />
Features and Benefits:<br />
• Transparent, low shrink-casting with tacky-free surfaces<br />
• Very good flow behaviour (low-viscous)<br />
• Cold-hardening, demouldable at room-temperature, applicable at slightly increased temperatures<br />
• High fillable casting resin<br />
• Causes pressure-resistant and impact-resistant (tough) moulds / components with high strength and very<br />
low shrinkage<br />
Industrial Modelling / Hobby Modelling / Boatbuilding:<br />
• Foundry patterns, die plates, reproduction patterns<br />
• Building of medium moulds and castings<br />
• Encapsulation of decorative elements<br />
• Levelling compound / injection resin for structural repairs<br />
Product Properties: Resin Hardener<br />
HP-E300GB<br />
Colouring<br />
transparent<br />
Mixing ratio<br />
weight 100 35<br />
Mixed viscosity<br />
low viscous<br />
Pot life (100g at 20°C) minutes<br />
> 300<br />
Demouldable after* (at 20°C) hours<br />
< 48<br />
Demouldable after (at 30°C) hours<br />
< 24<br />
Processing temperature (optimum) °C<br />
18 - 35<br />
Technical<br />
Data Sheet<br />
Online Shop<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com 85