Delivery Program 12-2021
Delivery Program HP-Textiles GmbH 12-2021
Delivery Program HP-Textiles GmbH 12-2021
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Roller Coating Epoxy-System ▪ HP-E30RB<br />
The Epoxy-System HP-E30RB is a coloured (similar to RAL 7032 pebbly grey), solvent-free and filled two-component<br />
combination of resin and hardener with medium working time (pot life) suitable for high quality floor and<br />
wall coatings<br />
Features and Benefits:<br />
RAL 7032<br />
• Spreadable and rollable coating mass for floor and wall coatings<br />
• Very good adhesive properties, high abrasion-resistance<br />
(in combination with our primer/sealer HP-E80FS)<br />
• If needed, anti-slip material can be added. Please refer to the data sheet for further information<br />
• High mechanical strength and chemical resistance<br />
• High quality surface, easy to clean<br />
• Free of solvents, can be thinned with HP-XB upon demand (maximum up to 5 %)<br />
• Coloured, similar to RAL 7032 pebble grey, more colours upon request<br />
• Average consumption is between 0,4 - 0,6 kg/m² per layer<br />
• Free of substances of very high concerns (SVHC)<br />
Applicable on cement bonded surfaces:<br />
• For coatings of new and slightly porous surfaces<br />
• High quality surface finishing for walls and floors indoors and outdoors<br />
Epoxy Resin Systems<br />
Product Properties: Resin Hardener Method<br />
Mixing ratio<br />
weight<br />
HP-E30RB<br />
Mixed viscosity (at 20°C) viscous (self-leveling)<br />
Pot life (at 20°C) minutes<br />
Walkable after (at 20°C) hours<br />
Walkable after (at 15°C) hours<br />
Processing temperature (optimum) °C<br />
Processing temperature (minimum) °C<br />
Technical<br />
Data Sheet<br />
100 22<br />
30<br />
24<br />
48<br />
20 - 25<br />
15<br />
Online Shop<br />
74<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com