Delivery Program 12-2021
Delivery Program HP-Textiles GmbH 12-2021
Delivery Program HP-Textiles GmbH 12-2021
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Epoxy Filler ▪ HP-E30S<br />
The epoxy filler HP-E30S is a filled two component combination of resin and hardener with fine extenders. This<br />
filler has very good adhesion to wood, steel, polyester and other surfaces. HP-E30S is solvent-free and therefore<br />
low unpleasant odour. Further more this epoxy filler is suitable for permanent immersion in (sea) water.<br />
Features and Benefits:<br />
• Very good adhesion to wood, steel, polyester and other surfaces<br />
provided with suitable primers<br />
• Water vapour impermeable<br />
• Resistant to various chemicals<br />
• Among others, usable for osmosis treatment<br />
• Easy to sand<br />
• Semi-flexible<br />
• Suitable for permanent immersion in (sea) water<br />
• Dust dry after approx. <strong>12</strong>0min<br />
Product Properties: Resin Hardener Method<br />
Colouring<br />
Mixing ratio<br />
Mixed viscosity<br />
weight<br />
Pot life (100g at 20°C) minutes<br />
Dust dry after (at 20°C) hours<br />
Recoating interval (at 20°C) hours<br />
Processing temperature (minimal) °C<br />
HP-E30S<br />
Light green - mat<br />
pasty<br />
Density g/cm³ approx. 1,5 (mixed)<br />
Solid Content % approx. 100<br />
Flash Point (DIN 53213 °C<br />
100 50<br />
Technical<br />
Data Sheet<br />
30<br />
2<br />
48<br />
15<br />
> 100<br />
Online Shop<br />
Epoxy Resin Systems<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com 73