Delivery Program 12-2021

Epoxy-System for Aquariums and Terrariums
Our terrarium / aquarium systems have been developed specifically for the use in these areas. The sealed surfaces
are impact, scratch and bite resistant. The result is a waterproof barrier which can be easily cleaned and disinfected.
A nesting of bacteria and pathogens into the ground is prevented.
Features and Benefits:
As Laminating and Covering System
• Good wetting of the reinforcing fibres
• Make clear and tack-free surface
• Cold curing
• Good strength
• Sealing of metal, wood, various plastics and mineral substrates
• High surface protection, excellent hygiene and water barrier
• High impact resistance
Aquarium and Terrarium Systems Compared:
Technical
Data Sheet
Field of Application:
Humid Terrariums
Aquariums, paludariums
Desert Terrariums
high UV-resistance
Underground
Article
Others
low viscous
for hard surfaces
(OSB, stone, …)
medium viscous
for soft or non-porous
surfaces
(Styrofoam, …)
low viscous
for hard surfaces
(OSB, stone, …)
medium viscous
for soft or non-porous
surfaces
(Styrofoam, …)
HP-E45T HP-E45TM HP-E25TU HP-E25TMU
Also suitable for
saltwater aquariums
Suitable for
the use of UV lamps
E = Epoxy Resin Systems; T = Terrarium system; M = medium viscous; U = at higher UV load
Product Properties: HP-E45T HP-E45TM HP-E25TU HP-E25TMU
Colour
Mix ratio (resin : hardener) weight
volume
light yellow / clear
Mixed viscosity (at 20°C) mPa s low viscous medium viscous low viscous medium viscous
Pot life (at 20°C) minutes
Tack-free
hours
Processing temperature (optimum) °C
Processing temperature (minimum) °C
Consumption as a sealing
(unreinforced, unfilled)
g/m²
100:60 100:60 100:60 100:60
100:66 100:70 100:64 100:66
45 45 25 25
48 48 24 24
20 20 20 20
15 15 10 10
approxy 400g/m² (in two coats)
Epoxy Resin Systems
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com 69