Delivery Program 12-2021
Delivery Program HP-Textiles GmbH 12-2021
Delivery Program HP-Textiles GmbH 12-2021
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
PU Vacuum-Hose - Flexible -<br />
PU hose with high wall thickness and excellent flexibility.<br />
Use as resin-carrying line as well as reusable suction in combination with the vacuum pump HP VZ<strong>12</strong>00. Multiple<br />
use in combination with our connectors IQS standard.<br />
• Small bending radius by special flexibility<br />
• Very good flexibility at low tem- perature and recovery characteristics<br />
• Kink and corrosion proof<br />
• Resistant against aliphatic hydrocarbons and most lubrications<br />
• Non-aging in oxigene and ozone<br />
• Reusable<br />
ARTICLE<br />
OUTER Ø<br />
mm<br />
INNER Ø<br />
mm<br />
MAX. OPERATION TEMP.<br />
°C<br />
SHORE-HARDNESS<br />
A<br />
COLOUR<br />
MATERIAL<br />
HP-VZ1030 10 6,5 -35 > +60 97 transparent Polyurethan<br />
HP-VZ1040 <strong>12</strong> 8 -35 > +60 97 transparent Polyurethan<br />
PE Vacuum-Hose - Standard -<br />
The PE-Hose is used in the vacuum-injection (vacuum-infusion) process. It can be used mainly as a disposable<br />
product in combination with our connectors POM.<br />
• Low weight<br />
• High impact strength<br />
• Resistancy against acid, alkali and salt solutions<br />
• Mainly used as a disposable product<br />
ARTICLE<br />
OUTER Ø<br />
mm<br />
INNER Ø<br />
mm<br />
MAX. OPERATION TEMP.<br />
°C<br />
SHORE-HARDNESS<br />
D<br />
COLOUR<br />
MATERIAL<br />
HP-VZ1010 10 8 -10 > +40 50 nature Polyethylen<br />
HP-VZ10<strong>12</strong> <strong>12</strong> 10 -10 > +40 50 nature Polyesthylen<br />
Vacuum Technology<br />
Spiral Tube for Vacuum Infusion<br />
The Spiral Tube is used as a central suction line for the vacuum moulding.<br />
It is fixed on the vacuum bagging film with our Sealant Tape.<br />
ARTICLE<br />
DIAMETER Ø mm<br />
Inside Outside<br />
MAX. OPERATION TEMP.<br />
°C<br />
MELTING POINT<br />
°C<br />
MATERIAL<br />
HP-ST060 6 8,8 +80 +113 Polyethylen<br />
HP-ST080 8 10,8 +80 +113 Polyethylen<br />
HP-ST100 10 <strong>12</strong>,8 +80 +113 Polyethylen<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com 45