Delivery Program 12-2021

PUR-Priming Resin for EP-Resins ▪ HP-UC
HP-UC-9003 and HP-UC-9004 are a two component polyurethane primer/adhesion for applications with epoxy
resins. Especially suitable for smooth, non absorptive suboils (many plastics, glass, metals, tiles, …)
Characteristics:
• PUR primer for sticking or laminating on smooth surfaces
• High adhesion, suitable for all Epoxy Resins from HP-Textiles
• Black ground coat (primer for carbon design)
• For spraying, manual application with a paint-brush or a roller is also possible
• Wax free, without styrene
Product Properties: Resin Hardener Method
HP-UC
Colouring
black or white
Mixing ratio (weight)
weight 100 50
Mixed viscosity
low viscosity
Pot life (at 20°C) days
20 - 30
Can be laminable (at 20°C) hours
24
Theoretical consumption
g/m²
80 - 150
Technical
Data Sheet
EP-Priming Resin for EP-Resins ▪ HP-E80FS
The epoxy system HP-E80FS is an unfilled, low viscous combination of resin and hardener with high adhesion to
mineralized / porous foundations.
Epoxy Resin Systems
Characteristics:
• Very good wetting
• Causes tacky-free surface
• Osmosis protection, filler for wooden porosities, water barrier layer
• Primer / Adhesion Promoter for several surfaces
• Corrosion Prevention for metal / aluminium (bare)
Product Properties: Resin Hardener Method
Colouring
Mixing ratio (weight)
Mixing ratio (volume)
Mixed viscosity
weight
volume
Pot life (at 20°C) days
HP-E80FS
yellowish
100 60
100 68
low viscosity
35
Technical
Data Sheet
Online Shop
54
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com