Delivery Program 12-2021
Delivery Program HP-Textiles GmbH 12-2021
Delivery Program HP-Textiles GmbH 12-2021
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
MTI ® - Hose<br />
Gases can escape through the membrane and be<br />
sucked off.<br />
membrane<br />
vacuum<br />
air or gases<br />
resin System<br />
Resin flow is stopped at the membrane<br />
and evenly distributed in the<br />
component.<br />
Vacuum Technology<br />
The MTI ® - Hose is a membran coated suction pipe in the branch of vacuum infusion. This new technology<br />
will provide more quality, less costs and better mechanical properties. The pores of the membrane are very<br />
small, holding the resin back and only leaving the air through the pores. The MTI ® - Hose should be placed<br />
as a ring line on the edge of the mould.<br />
Advantages:<br />
• Optimization of component quality and minimization of air inclusions<br />
• No resin trap is needed anymore, reducing resin consumption<br />
• Freely configurable resin course, it eliminates complex calculations<br />
• Minimization of dry spots, complete component impregnation and higher process reliability<br />
• High fibre volume fraction, adjustable via the infiltrated amount of resin<br />
ARTICLE<br />
OUTER Ø<br />
mm<br />
INNER Ø<br />
mm<br />
MAX. OPERATION TEMP.<br />
°C<br />
EXHAUST CAPACITY/m<br />
by pabs. 50mpas<br />
HP-MTI-08 15 8 80 < 50l/m<br />
SUITABLE FOR<br />
EP- & UP-Resin<br />
On our website in the Video & Download Portal you‘ll find various work instructions and<br />
videos around the theme of the MTI ® -Hose for free. You‘ll reach our download portal<br />
comfortably over this QR-Code, or on our website www.hp-textiles.com under the category<br />
„service“.<br />
42<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com
Change language