Delivery Program 12-2021
Delivery Program HP-Textiles GmbH 12-2021
Delivery Program HP-Textiles GmbH 12-2021
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Covering and Laminating Epoxy-System ▪ HP-E30TLS<br />
The Epoxy-System HP-E30TLS is an unfilled two-component combination of resin and hardener with medium<br />
working time (pot life). It is versatile for surface coatings and laminating.<br />
Features and Benefits:<br />
• good wet-out of reinforcement fibres<br />
• very good mechanical and chemical properties<br />
• Universally suitable for pre-sealing or / and laminating of fibre reinforced<br />
surface coating in system configuration between primer (HP-E80FS) and<br />
topcoat (HP-E30TDS)<br />
• Completely free of solvents, therefore<br />
- direct working on PU- or PS/EPS foam is possible<br />
- suitable for indoor use (fish ponds, pools, tanks,…)<br />
• Using for tough, high quality, fibre reinforced coatings in following:<br />
- outdoor AND INDOOR swimming pools, water tanks, fish and aquaculture ponds<br />
- roofs and rooftops<br />
- balcony sealing<br />
- agricultural and industrial coantings<br />
For best results, we recommend a finish with a suitable epoxy-topcoat (like HP-E30TDS)!<br />
Epoxy Resin Systems<br />
Product Properties: Resin Hardener Method<br />
HP-E30TLS<br />
Mixing ratio<br />
weight 100 60<br />
Mixed viscosity (at 20°C) low viscous<br />
Pot life (at 20°C) minutes<br />
30<br />
Walkable after (at 20°C) hours<br />
24<br />
Walkable after (at 15°C) hours<br />
48<br />
Processing temperature (optimum) °C<br />
20 - 25<br />
Processing temperature (minimum) °C<br />
15<br />
Technical<br />
Data Sheet<br />
Online Shop<br />
66<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com