Delivery Program 12-2021

Multi-purpose Resin System ▪ BM-E25L / BM-45L
The epoxy resin multi-purpose systems BM-E25L and BM-E45L are unfilled, low viscous 2 components combinations
of resin and hardener with a working time of approx. 25 / 45 min for laminate, top coat, adhesive, spatula
and mould making applications.
as Laminating Resin:
• Very good wetting if reinforcement fibres are
rough
• For clear and sticky free surfaces
as Mould Resin:
• As hard-elastic mould making system (adjustable
with colour pigments)
• Applicable for coupling layers (with fillers)
as Covering Layer Resin:
• High resistance to chemicals, e.g. styrene, fuels
• Also applicable for coatings of tanks, pipelines or
containers
• For clear and sticky free surfaces
as Adhesive Resin or basic for Fillers:
• Due to its very high adhesive strength also applicable
for adhesive or spatula use (e.g. in combination
with thixotropic agents PK22 and cotton
flocks BF1)
Due to its special formulation, the system can also be processed under difficult circumstances. It is impervious
to intermediate reactions (e.g. amine redness).
note:
All raw materials are free of nonylphenol!
Epoxy Resin Systems
Product Properties: Resin Hardener Method
BM-E25L BM-E45L
Mixing ratio
weight 100 60
Mixed viscosity
low viscous
Pot life (at 20°C) minutes
25 45
Demouldable after
h
48
Processing temperature (optimum) °C
7
Processing temperature (minimum) °C
15 - 25 18 - 25
BM-E25L BM-E45L
Technical
Data Sheet
Technical
Data Sheet
Online Shop
60
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com