Delivery Program 12-2021
Delivery Program HP-Textiles GmbH 12-2021
Delivery Program HP-Textiles GmbH 12-2021
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Epoxy Mould Covering Resin ▪ HP-E30FB<br />
The epoxy resin system HP-E30FB is an aluminium-filled, high-viscous combination of resin and hardener with<br />
high abrasion resistance and processing time (pot life) of about 30 minutes.<br />
Features and Benefits:<br />
• High quality mould covering resin, aluminium-filled<br />
• Non-drip, without run-off on vertical surfaces, high thixotropic<br />
• Produced in vacuum therefore free of air bubbles<br />
• Coloured in deep black<br />
• For abrasion- and breaking resistance surfaces with good thermal conductivity<br />
• User friendly mixing ratios (100:10) (If necessary dilutable with XB-thinner)<br />
• Innovative formulation, free of DETA¹ with high styrene resistance*<br />
• For following layers wet-in-wet. Another option is to work with a dry-coupling layer.<br />
Mold and Casting Resins<br />
Product Properties: Resin Hardener<br />
HP-E30FB<br />
Colouring<br />
deep black<br />
Mixing ratio<br />
weight 100 10<br />
Mixed viscosity<br />
(at 20°C)<br />
Pot life (at 20°C) minutes<br />
30<br />
Demouldable after<br />
hours<br />
24<br />
Processing temperature (optimum) °C<br />
20 - 25<br />
Processing temperature (minimum) °C<br />
15- 25<br />
Technical<br />
Data Sheet<br />
Online Shop<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com 83