Delivery Program 12-2021
Delivery Program HP-Textiles GmbH 12-2021
Delivery Program HP-Textiles GmbH 12-2021
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Polyester Non-Woven Absorber<br />
The non-woven absorber has a good drapeability.<br />
Ideal for the use in connection with components containing complex curvatures or acute radius. It absorbs the<br />
excess resin which is pressed through the Perforated Release Film. It can be used effectively in single or multiple<br />
layers.<br />
ARTICLE<br />
WEIGHT<br />
g/m²<br />
WEAVE<br />
THICKNESS<br />
mm<br />
WIDTH<br />
cm<br />
max. TEMPERATURE<br />
°C<br />
HP-VP80P 80 needled 2 80 185<br />
HP-VP150P 150 needled 3 - 4 130 185<br />
FIBRE TYPE<br />
Polyester black<br />
Polyester white<br />
Perforated Release Film<br />
High-tensible perforated Release Film. Ideal for the use in a vacuum bag / autoclave processing of composites<br />
and vacuum press method. Suitable for the use of polyester, epoxy and phenolic resin systems. Basic purpose of<br />
the Release Film is to ensure the proper release of the helping material from the component. The Release Film<br />
is placed directly on the Peel Ply in contact with the laminate. It separates the laminate from beather / bleeder<br />
fabrics, which have no release characteristics.<br />
ARTICLE<br />
WEIGHT<br />
g/m²<br />
THICKNESS<br />
µm<br />
WIDTH<br />
cm<br />
max. TEMPERATURE<br />
°C<br />
ENLOGATION AT<br />
BREAK %<br />
MATERIAL<br />
HP-RF30/130 30 35 130 <strong>12</strong>0 > 210 HDPE<br />
HP-RF44/100 30 44 100 <strong>12</strong>0 > 210 HDPE<br />
HP-RF44/156 30 44 156 <strong>12</strong>0 > 210 HDPE<br />
Vacuum Technology<br />
Vacuum Mesh / Infusion Mesh<br />
The Infusion Mesh has to be applied between the Vacuum Film and the Release Film to ensure the even flow of<br />
resin throughout the moulds surface. It is generally coloured in green for a better visual clarity. After the resin is<br />
cured it has to be removed from the surface of the mould area.<br />
ARTICLE<br />
WEIGHT<br />
g/m²<br />
THICKNESS<br />
mm<br />
WIDTH<br />
cm<br />
max. TEMPERATURE<br />
°C<br />
FIBRE TYPE<br />
HP-IM145/100 145 1,15 100 <strong>12</strong>0 HDPE<br />
HP-IM145/1<strong>12</strong>0 145 1,15 <strong>12</strong>0 <strong>12</strong>0 HDPE<br />
HP-IM230/<strong>12</strong>0 200 1 <strong>12</strong>0 <strong>12</strong>0 HDPE<br />
DRAPABILITY<br />
good<br />
good<br />
not good<br />
IDEAL FOR<br />
COMPLEX<br />
PARTS<br />
IDEAL FOR<br />
LARGE, FLAT<br />
PARTS<br />
HP-IM145/100<br />
HP-IM230/<strong>12</strong>0<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com 39