2024 Catalog

Replacement Gaskets:
ENGINE
Find Us On
FITTINGS
FUEL/AIR
FILTERS
COOLING/
TANKS
DEGREASERS
& CLEANERS
Fuel Pumps & Accessories
A. Pro/Cam Mechanical Fuel Pumps
• 6 Valve SBC, 130 Gals. per hour, designed for longevity and quality
• Engineered to eliminate common failures and machined with 1/2”
inlets and outlets so more fuel gets to the engine faster
• Maintains consistent pressure at higher rpms
• Rated up to 1200 hp on gas, and 600 hp on alcohol or E85
• A regulator is required for the 11 and 15 psi pumps
7.5 PSI Pro/Cam Fuel Pump 100 68879-7
11 PSI Pro/Cam Fuel Pump 100 68879-11
15 PSI Pro/Cam Fuel Pump 100 68879-15
B-C. Carter Mechanical Fuel Pumps
• Competition Series, 120 GPH, 7 to 8.5 psi
• For -10 inlet use 002 CA-5048 pump, and 002 MP385 fitting
B. SBC, -8 AN Male Inlet, -8 Male Outlet, Removeable Fittings 002 CA-5048
C. -10 X 3/8” Fitting With Washer 002 MP385
A B C
ELECTRICAL/
GAUGES
DRIVELINE
Pro/Cam Rollerized
Fuel Pump Push Rod
• Reduces friction and wear to extend cam life
• Recommended for use with roller cams
• Improves fuel efficiency
• Lightweight
SBC, Fuel Pump Roller Pushrod 100 68879
Fuel Pump Push Rods
• Lightweight design with
hardened ends reduces
reciprocating mass to prevent
pump arm “float” and subsequent fuel starvation
• For use in drag, oval track and street performance applications
• Not for 604
Small Block & Big Block Chevy Fuel Pump Push Rods 085 65750
CHASSIS/
CONSTRUCTION
BODY
COMPONENTS
TOOLS
A-D. Fuel Pump Plates & Gaskets
• SB GM plates include gaskets
A. Fuel Pump Mounting Plate, SBC 100 6888-1
Replacement Gaskets:
B. Fuel Pump Block Off Plate, SBC 100 6888-3
C. Fuel Pump Gasket, SBC 100 68880
D. Gasket For Fuel Pump Plate, SBC 100 68882
A
B
C
D
SAFETY
STEERING
Fuel Pressure Gauge
• 15 PSI
• 1/8” NPT connection on back
• Gauge is 1-7/8” in diameter
Fuel Pressure Gauge 100 68874
Magna Fuel Large 2-Port Regulator
• (2) -8 AN O-ring outlets, (1) -10 AN O-ring
inlet, and 1/8” NPT gauge port
• Durable metal to metal seat for instantaneous
response and low maintenance
• Suitable for drag racing, circle track, road racing,
mud bog, power boat, and tractor pulling
• Adjustable base pressure
• No Return to Cell
2-Port Regulator 100 68872
Replacement Diaphragm 100 68872-1
FRONT
SUSPENSION
REAR
SUSPENSION
HP Billet with Idle Bleed
• 3/8 NPT inlet and outlet ports, 1/8” NPT gauge port
• Used in systems with a return line back to the fuel tank
• For use with mechanical or belt drive fuel pumps
• Adjustable from 4.5 to 9 PSI
• One inlet, one outlet, one return or bypass
• Utilizes an idle bleed for precise control of idle pressure
• Black anodized body and clear anodized
top for corrosion resistance
• Mounting bracket included
HP Billet With Idle Bleed 075 12-842
HP Billet with O-Ring Ports
• (1) -8AN O-Ring inlet, (1) -8AN O-Ring
outlet, (1) -6AN O-Ring return
• 1/8” NPT gauge port
• Used in systems with a return line back to tank
• Designed for use with the Holley® HP in-line fuel pumps
or other high pressure pumps where return line is needed
• Adjustable from 405 to 9PSI for precise
fuel pressure adjustments
• Mounting bracket included
HP Billet With O-Ring Ports 075 12-845
HUBS &
WHEELS
BRAKES
102
KeyserManufacturing.com
Some parts may contain chemicals
known in the state of California or other
states with similar laws to cause cancer
or reproductive harm.