2024 Catalog

Safety Wire
• Safety Wire is widely used to secure all kinds of fasteners.
• Made of .032” diameter 304 stainless steel and comes in one
pound cans
Safety Wire 100 7740
Safety Wire Drill Block
• Works on bolts from 3/16” - 5/8” diameter
• Simply insert the bolt and get a perfect center hole
TOOLS
Suspension Tools
Safety Wire Pliers
• Get three tools in one with
these spring-loaded,
automatic-return safety
wire pliers. You get a
cutter, a wire twister, and a heavy-duty pair
of pliers. You can grip, twist, and snip safety wire faster and better than ever before.
• Designed for aircraft, industrial, and other vibrating applications, these pliers are
versatile tools to help you do reliable safety wiring (lock wiring) rapidly and consistently.
• A must for installing safety wire
Safety Wire Pliers 100 7742
ENGINE FITTINGS FUEL/AIR
FILTERS
COOLING/
TANKS
Safety Wire Drill Block 100 7741
Splined Tube Wrench
• Double-sided, open-ended wrench for adjusting 3/4” and 5/8” splined tubes
• Lightweight ergonomic design
• Anodized aluminum construction
Splined Tube Wrench
100 SPW
Tie Rod Socket
• 15/16th hex head
• 27” End to End
• Tighten inner tie rods on rack & pinions
Tie Rod Extension
430 TR1
DEGREASERS
& CLEANERS
ELECTRICAL/
GAUGES
A-B. Ball Joint Spreader
• Place the tool between the upper and lower ball joint stud with the nut removed from
one ball joint, then turn the tool to push the ball joint from the spindle.
• Add the extention for taller spindles.
A. Ball Joint Spreader Tool 022 2154
B. Ball Joint Spreader Extension 022 2155
A
B
DRIVELINE CHASSIS/
CONSTRUCTION
Coil-Over Spring
Unloader
• Designed to attach
to Accu-Force
spring smashers
• Allows safer loading and
unloading of heavy stack
springs or springs that
require a lot of pre-load
• Keeps springs in
a straight line and
captured in a pocket where
the spring cannot unwind
• The two holes on the #310 31018 and
#310 31019 spring unloader are for 1” tubing.
• Accu-Force Center to Center (distance between the 2 small holes) is 9”
• Boyd-Bilt Center to Center (distance between the 2 small holes) is 9.5”
Coil-Over Spring Unloader 310 31018
Coil-Over Spring Unloader For Boyd Bilt Spring Smasher 310 31019
Coil-Over Spring Retainer
• Used with the Coil Spring Unloader when
using smaller diameter coil over springs
• When inserted into the unloader, provides a
recessed lip for the smaller spring to sit in
Coil-Over Spring Retainer 310 30121
A-C. Precision Ball Joint Inspection Gauges
• Slide the billet aluminum gauge over the ball joint stud to check for straightness. If the gauge
seats, the stud is good. If the gauge will not seat, the stud is bent.
• Checker “A” does all Howe ball joints with a 727 Chrysler pin
• Checker “B” does all 22413 and 22410 ball joints
• Checker “C” does all 022 22320, 022 22305 and 022 223200 Howe ball joints
A. Ball Joint Inspection Gauge (Checker “A”) 022 22500
B. Ball Joint Inspection Gauge (Checker “B”) 022 22501
C. Ball Joint Inspection Gauge (Checker “C”) 022 22502
GN Spindle Nut Socket
• Makes installing our 100 20421 spindle nut a snap
Grand National 2.5
Wide 5 & 5x5 Spindle Nut Socket
• Makes installing our 100 2143 and 100
2143A spindle kits a snap
• Hex-style spindle nut sockets are used to tighten or
loosen Wide 5 and tubular 5x5 spindle nuts.
• These aluminum spindle nut sockets will fit Wide
5, Howe, Allstar, and PCR 5x5 applications
100 2142GN
PCR, Howe, Vogel, 5 X 5, W-5 100 2142
A-B. Sockets for
Screw-In Ball Joints
• Easily installs or removes screwin
upper and lower ball joints
• Fits Moog and Howe ball joints
A
A. Upper Ball Joint Socket (772) 100 346
B. Lower Ball Joint Socket (727) 100 347
A
B
C
B
BODY
COMPONENTS
TOOLS SAFETY STEERING FRONT
SUSPENSION
REAR
SUSPENSION
HUBS &
WHEELS
WARNING:
Cancer and Reproductive Harm
www.P65Warnings.ca.gov 800-472-2464
193
BRAKES