2024 Catalog

More documents

Recommendations

Info

ENGINE Find Us On FITTINGS FUEL/AIR FILTERS COOLING/ TANKS Brakeline Hose & Fittings Teflon - Lined Brakeline Hose • Sold by the foot • Functions smoothly at extreme temperatures • Superior fluid compatibility, abrasion and corrosion resistance • Withstands constant flexing and vibration Unmatched strength. Ultimate flexibility. • Resists fatigue and failure under high pressure • Carries fluids of all kinds without contamination Dash Size I.D. O.D. Max. Operating Pressure PSI Minumum Bend Radius Vacuum Service Bulk Part # -03 .14” .25” 3,000 1.5” 28” 003 FBC0300 -04 .19” .30” 3,000 2” 28” 003 FBC0400 CONSTRUCTION: Extruded Teflon inner tube with stainless steel wire braid cover TEMPERATURE RANGE: -100° F to +450° F (-73° C to + 232° C). DEGREASERS & CLEANERS ELECTRICAL/ GAUGES DRIVELINE Brakeline Fittings - for Teflon Hose Size Straight: Reusable Steel Swivel Straight: Steel Crimp 45° Elbow: Reusable Steel 45° Elbow: Steel Crimp 90° Elbow: Forged Adj. Reusable Stainless Steel Swivel 90° Elbow: Steel Crimp -03 003 FBM1100 003 FBM1124 003 FBM1110 N/A 003 FBM1150 003 FBM1128 -04 003 FBM1101 003 FBM1125 003 FBM1111 003 FBM1127 N/A 003 FBM1129 CHASSIS/ CONSTRUCTION BODY COMPONENTS TOOLS A-D. Brake Adapters A. 3/16” Line To -3AN Brake Fitting 100 43FM1032403 B. 3/16” Line To -4AN Brake Fitting 100 43FM1032404 C. 10 MM To -3AN Banjo Adapter 003 FBM2947 D. 3/8” SAE To -3AN Banjo Adapter 003 FBM2949 A B C D Aluminum Crush Washers • Sold in packs of 5 Size Part # -04 003 FBM3513 -06 003 FBM3514 -08 003 FBM3515 -10 003 FBM3516 -12 003 FBM3517 Quick Disconnect Brake and Clutch Coupling • Quickly connect/disconnect brake and clutch lines without fluid loss, air inclusion, and the need to bleed the line • Includes a safety clip on the lanyard to prevent accidental disconnection • Male half includes a jam nut for bulkhead mounting • Temperature range -40°F to +250°F • For use with non-petroleum brake fluids Size Part # -03 022 8290 STEERING SAFETY FRONT SUSPENSION Brake Duct Hose Black 10 Foot Hose • Reinforced with spring steel for added flexibility • Both 3” and 4” can withstand up to 300 degree heat 3” • Duct Hose D-Ply 100 481 4” Duct Hose D-Ply 100 482 Orange 10 Foot Hose • Double ply silicone coated fabric, reinforced with spring steel for added flexibility • Both 3” and 4” can withstand up to 600 degrees 3” Duct Hose D-Ply Orange 100 483 4” Duct Hose D-Ply Orange 100 484 REAR SUSPENSION HUBS & WHEELS Silver 12 Foot Hose • Lightweight laminate hose • Heat reflective up to 625 degree heat 3” Duct Hose D-Ply 100 485 Hose Connector Brake Cooling Hose Connector 014 000-425 BRAKES 294 KeyserManufacturing.com Some parts may contain chemicals known in the state of California or other states with similar laws to cause cancer or reproductive harm.
3” ASA Single Inlet • Fits shorter Ford style spindles • Also fits older style ASA spindles • Sold as each Left Hand 100 4791 Right Hand 100 4792 3” Single Inlet • Fits a variety of spindles • Single inlet • Sold as each Left Hand 100 4786 Right Hand 100 4785 LEFT RIGHT 3” Dual Inlet • Fits a variety of spindles • Dual inlet • Sold as each Left Hand 100 4788 Right Hand 100 4787 LEFT RIGHT 3” Straight Dual Inlet 5” LEFT 3” Single Straight Hose RIGHT 3” Outlaw Single Inlet • Fits shorter Ford style spindles • Also fits older style ASA spindles • Sold as each Hose Connector BRAKES Aluminum Spindle Duct Left Hand 100 4793 Right Hand 100 4794 4” Single Inlet • Fits a variety of spindles • Single inlet • Sold as each Left Hand 100 4786-4 Right Hand 100 4785-4 3” RH Single Inlet 30° • Fits a variety of spindles • Single inlet Right Hand 100 4785-30 Brake Cooling Hose Connector 014 000-425 6-1/2” NACA Brake Ducts 3” Single Offset Hose LEFT LEFT RIGHT RIGHT RH 30° ENGINE FITTINGS FUEL/AIR FILTERS COOLING/ TANKS DEGREASERS & CLEANERS ELECTRICAL/ GAUGES DRIVELINE CHASSIS/ CONSTRUCTION 6” 9-1/2” 3” Straight Dual 100 49005 8-1/2” 3” Single Straight 100 49012 9-1/2” 3” Single Offset 100 49013 BODY COMPONENTS Single Hose Square Tail • Clear • Uses 3” Hose Single Hose Square 100 49008 Dual Hose Naca Duct • Clear or Black • Uses 3” Hose Clear Dual Hose 100 49011 Black Dual Hose 100 490019 Universal Single Hose Fits 3” - 4” Hose Angled Includes front screen Universal 014 000-412D 5-3/4” 4” 10-1/2” 10-3/4” 5-3/4” 9” Mini Naca Duct • Clear • Uses 1.25” Hose Mini Hose 100 49004 Single Hose Naca Duct • Clear or Black • Uses 3” Hose Clear Single Hose 100 49009 Black Dual Hose 100 490018 2-3/4” 1-1/2” 4” 10-5/8” 3-3/4” 5-7/8” TOOLS SAFETY STEERING FRONT SUSPENSION REAR SUSPENSION HUBS & WHEELS WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov 800-472-2464 295 BRAKES
Page 1 and 2:
2024 CATALOG Call Today 1-800-472-2
Page 3 and 4:
TOLL FREE 800-472-2464 KeyserManufa
Page 5 and 6:
TURRET STAMPING We have experience
Page 7 and 8:
QUARTER MIDGET 751 & 752 SERIES •
Page 9 and 10:
Stroke Stroke Extended Compressed 7
Page 11 and 12:
Piston Options Optional Pistons 3 P
Page 13 and 14:
Page 15 and 16:
Double Adjustable Single Adjustable
Page 17 and 18:
Independent High Speed Compression
Page 19 and 20:
Page 21 and 22:
Piston Options Optional Digressive
Page 23 and 24:
Steel and Aluminum BVIDA Shock Part
Page 25 and 26:
Page 27 and 28:
Piston Options Optional Digressive
Page 29 and 30:
Page 31 and 32:
Page 33 and 34:
Non-Adjustable Stroke Stroke Extend
Page 35 and 36:
Page 37 and 38:
PISTONS .406 ID Piston Options •
Page 39 and 40:
SPRINGS STANDARD COIL-OVER SPRINGS
Page 41 and 42:
TWO-STAGE STACK SPRING Spring Slide
Page 43 and 44:
a 7/16” ID - fits Integra 4400 se
Page 45 and 46:
SHOCK TOOLS Shock Vise • All-in-o
Page 47 and 48:
SHOCK TOOLS Thread Chaser • Use f
Page 49 and 50:
SETUP TOOLS WHEEL LOAD INDICATOR
Page 51 and 52:
MACHINES STANDARD TIRE PREP MOTOR A
Page 53 and 54:
TIRE WASH STAND • Tire Wash Stand
Page 55 and 56:
ACCESSORIES 2x2 Receiver Mount For
Page 57 and 58:
Drag Racing Tire Treatment • Drag
Page 59 and 60:
FUEL, OIL & ADDITIVES Find Us On TF
Page 61 and 62:
Find Us On Yamaha Greaseable ATV St
Page 63 and 64:
Front Spindle Assembly Steering Whe
Page 65 and 66:
Standard Steel Rear Motor Mounts
Page 67 and 68:
Easy mounting with 4 pre-drilled ho
Page 69 and 70:
Muffler Turn Down • Designed to d
Page 71 and 72:
A. SBC - Conventional Crossover Hea
Page 73 and 74:
ENGINE Valve Covers Gaskets, Breath
Page 75 and 76:
Aluminum Port Fitting A B (Port) Pa
Page 77 and 78:
Manufacturing Co. Inline Oil Filter
Page 79 and 80:
A. Gilmer Lightweight Oil Pump Pull
Page 81 and 82:
A-E. Set A - 30% Reduction, Double
Page 83 and 84:
SBC Crate Engine Kit Without Steeri
Page 85 and 86:
ENGINE Engine Oil Additives ENGINE
Page 87 and 88:
A-E. AN Fitting Wrenches • Sturdy
Page 89 and 90:
Aluminum AN Pipe Adapters “A”
Page 91 and 92:
Straight FITTINGS Aluminum Fittings
Page 93 and 94:
Carries fluids of all kinds without
Page 95 and 96:
FITTINGS Brakeline Hose & Fittings
Page 97 and 98:
1” Governor Plate • Restricts a
Page 99 and 100:
Power Valves • The power valve al
Page 101 and 102:
Quick Fill Dump Can • Aluminum qu
Page 103 and 104:
• Reusable Foam Filter Shield •
Page 105 and 106:
A-E. Long Fuel Filters • These fi
Page 107 and 108:
COOLING/TANKS ENGINE FITTINGS FUEL/
Page 109 and 110:
3 COOLING/TANKS CHEVY RADIATORS 2 1
Page 111 and 112:
ROUSH YATES RADIATORS 3 4 5 2 1 COO
Page 113 and 114:
A-D. Wire Screen • Stainless stee
Page 115 and 116:
Roll Bar Mount Expansion Tank • B
Page 117 and 118:
Carbon Resin GM Style 4 Blade Fan
Page 119 and 120:
Clamp-On Heat Shield Kit • Blocks
Page 121 and 122:
DEGREASERS/CLEANERS Maxima SC1 Clea
Page 123 and 124:
ELECTRICAL/GAUGES A. Mini Brake Bal
Page 125 and 126:
ELECTRICAL/GAUGES Weatherproof Pane
Page 127 and 128:
ELECTRICAL/GAUGES A-B. Battery Cabl
Page 129 and 130:
MSD 7AL Pro Series Ignition • Red
Page 131 and 132:
ELECTRICAL/GAUGES MSD Ignition Coil
Page 133 and 134:
ELECTRICAL/GAUGES Autolite Spark Pl
Page 135 and 136:
We can do that! DRIVELINE Ts TECH S
Page 137 and 138:
5-1/2” Yoke - Jericot/T-10 - 31 S
Page 139 and 140:
Axle Tube Weight Clamp • Securely
Page 141 and 142:
A-E. Spindle and Axle Snouts • 10
Page 143 and 144:
A-B. Standard Quick Change Locker
Page 145 and 146:
Professional Series • Black oxide
Page 147 and 148:
A-B. Magnesium Side Bells A. Right
Page 149 and 150:
SPRINT QUICK CHANGE PARTS (STANDARD
Page 151 and 152:
A-B. Black Aluminum Shifter Kits
Page 153 and 154:
Brinn Standard Transmission • Alu
Page 155 and 156:
Magnesium Bellhousings • Can be u
Page 157 and 158:
A. 99T 5.5” MAGNESIUM ULTRA Bellh
Page 159 and 160:
A. Optimum V-Drive 5.5 Reverse Moun
Page 161 and 162:
Clutch Packs - Pro Series, V-Drive,
Page 163 and 164:
CHASSIS/CONSTRUCTION 1. Finished! 2
Page 165 and 166:
CHASSIS/CONSTRUCTION A-J. Body/ Tri
Page 167 and 168:
CHASSIS/CONSTRUCTION Steel Threaded
Page 169 and 170:
CHASSIS/CONSTRUCTION Rack Plate •
Page 171 and 172:
CHASSIS/CONSTRUCTION Ballast & Clam
Page 173 and 174:
16” BODY COMPONENTS MODIFIED SPOI
Page 175 and 176:
BODY COMPONENTS Body Brace Straps
Page 177 and 178:
t A-D. 1/2” X 4” Aluminum 2 Pin
Page 179 and 180:
BODY COMPONENTS A-B. Panel Plates
Page 181 and 182:
• Many uses include mounting roof
Page 183 and 184:
BODY COMPONENTS Rolled Plastic •
Page 185 and 186:
BODY COMPONENTS MD3 Rocker Panels
Page 187 and 188:
Plastic MD3 Dirt Style Noses • Hi
Page 189 and 190:
Nose ID BODY COMPONENTS Bumper Cove
Page 191 and 192:
A-D. Windshield Cowl BODY COMPONENT
Page 193 and 194:
BODY COMPONENTS Street Stock Noses
Page 195 and 196:
Safety Wire • Safety Wire is wide
Page 197 and 198:
Data Engineering System • Record
Page 199 and 200:
Tire Siper/Groover Depth Gauge •
Page 201 and 202:
STD. Tire Wrap Attachment • For u
Page 203 and 204:
Paint Tire Markers • Permanent, d
Page 205 and 206:
A-C. Fuel Funnel with Pre-Filter
Page 207 and 208:
Engine Stand • Sturdy steel const
Page 209 and 210:
5 Point Bolt-In Belt Harness Set
Page 211 and 212:
Foam Roll Bar Padding - 3 Foot Stic
Page 213 and 214:
Fire Bottle Clamps • 5# Bottle cl
Page 215 and 216:
Advantage Forced Air Dryer with Fan
Page 217 and 218:
A-B. Small Spline Pitman Arms • 1
Page 219 and 220:
Camaro Adjustable Center Link • R
Page 221 and 222:
Oversize Heims • Fits 3/4” stee
Page 223 and 224:
Pavement Late Model Slotted Eye •
Page 225 and 226:
A-B. Standard Servo For Remote Serv
Page 227 and 228:
Optional Power Steering Pump Adapte
Page 229 and 230:
A-C. KSE Belt Drive Tandem X Pump
Page 231 and 232:
A. Teflon - Lined Power Steering Ho
Page 233 and 234:
We can do that! FRONT SUSPENSION We
Page 235 and 236:
FRONT SUSPENSION Camaro 4 Bolt Uppe
Page 237 and 238:
A-Frame Mounting Bracket FRONT SUSP
Page 239 and 240:
FRONT SUSPENSION 15-5/8” Nova Sty
Page 241 and 242:
100 2723 1.27” Diameter - 1.50 Le
Page 243 and 244:
FRONT SUSPENSION LOWER BILLET SHOCK
Page 245 and 246: FRONT SUSPENSION A-B. Screw-In Uppe
Page 247 and 248: FRONT SUSPENSION A-E. Howe Screw-In
Page 249 and 250: FRONT SUSPENSION 2° 2° 2° It All
Page 251 and 252: FRONT SUSPENSION A. Pinto/Mustang I
Page 253 and 254: A-C. Alum. Wedge Bolt Assembly •
Page 255 and 256: A-B. Adjusters Splined Sway Bars
Page 257 and 258: FRONT SUSPENSION Aluminum Splined T
Page 259 and 260: Aurora, 2- Piece, Steel, Male, Gene
Page 261 and 262: Adjustable Panhard Drop Mount 100 6
Page 263 and 264: REAR SUSPENSION A-E. Aluminum Doubl
Page 265 and 266: 11-1/2” Hoop Panhard Bars • Pro
Page 267 and 268: Left Hand 45° Steel Birdcage • 1
Page 269 and 270: A-B. Aluminum Trailing Arm Brackets
Page 271 and 272: Aluminum Splined Tubes • Raised s
Page 273 and 274: Aurora, 2- Piece, Steel, Male, Gene
Page 275 and 276: A. Spring Loaded Torque Absorber
Page 277 and 278: A-F. 3-3/8” O.D. X 2-1/2” Tall
Page 279 and 280: 1 Piece Front Hub Kit • Front hub
Page 281 and 282: A-B. Grand National Rear Hub Kit
Page 283 and 284: Wilwood Drive Flange - O-Ring Mount
Page 285 and 286: A-C. 5x5 (2”) Timken Bearing Kits
Page 287 and 288: Coarse Thread Wheel Studs 5/8” X
Page 289 and 290: • 1/2” Steel Wheel Spacer Weigh
Page 291 and 292: 15x8 Bassett D-Hole IMCA Wheel •
Page 293 and 294: 3/16” Steel Pre-Made Brakelines
Page 295: A-D. Flange Style Banjo Bolts W/ Wa
Page 299 and 300: Standard GM Caliper Bracket Rear GM
Page 301 and 302: Cast Iron GM Metric 1978 and Later,
Page 303 and 304: A-J. AP Racing Brake Calipers Repla
Page 305 and 306: AP Directional Rotors • J-Hook De
Page 307 and 308: BRAKES Wilwood Pad Compound Guide C
Page 309 and 310: D-154 Metric GM Set 6.00 Inner Pad
Page 311 and 312: Tilton 74 Series Universal Master C
Page 313 and 314: Castrol SRF • Exceptionally high
Page 315 and 316: A. Floor Mount Pedals • Aluminum
Page 317 and 318: PARTS INDEX Exhaust................
Page 319 and 320: PARTS INDEX Tether - Spindle / Hood
Page 321 and 322: We can do that! Ts TECH SHEET: Rear
Page 323 and 324: SHOCK REPAIR REQUEST NAME: ACCOUNT
show all

2024 Catalog

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?