2024 Catalog

More documents

Recommendations

Info

ENGINE Find Us On FITTINGS FUEL/AIR FILTERS COOLING/ TANKS DEGREASERS & CLEANERS ELECTRICAL/ GAUGES DRIVELINE CHASSIS/ CONSTRUCTION BODY COMPONENTS TOOLS SAFETY STEERING FRONT SUSPENSION REAR SUSPENSION HUBS & WHEELS Axles & Seals A-E. Standard Axle Tube Seals • Tube seal helps seal rear end grease from leaving center section A. For Steel Tube (Fits Tubing Ø 2.650”) 100 8541 B. For Aluminum Tube (Fits Tubing Ø 2.500”) 100 8542 C. Replacement Tube Seal Only 100 8543 D. Replacement O-Ring for 100 8541 (3 needed per seal) 100 8541S E. Replacement O-Ring for 100 8542 (3 needed per seal) 100 8542S A-G. Premium Axle Tube Seals • Tube seal helps seal rear end grease from leaving center section • Silver seal works in most chromoly tubes A. Gold Seal for Alum. Tube (Fits Tubing Ø 2.500”) 114 AS9250 B. Blue Seal (Fits Tubing Ø 2.560”) 114 AS9218 C. Red Seal for Steel Tube (Fits Tubing Ø 2.625”) 114 AS9188 D. Silver Seal for Moly Tube (Fits Tubing Ø 2.750”) 114 AS9125 E. Economy Seal (Fits Tubing Ø 2.50-2.75”) 114 EAS1-05 F. Replacement Insert 114 AS1000NP G. Replacement O-Rings (Silver) 3 Pack 114 AS9125OR3 Solid Axles • Made from certified Hy-Tuff material • Heat treated and CNC machined true • Fits most Quick Change & Ford 9” floaters • 31-1/2” Long solid axle weighs 10.20 pounds Length Part # 28-1/2” 100 878067-28.5 29-1/2” 100 878067-29.5 30” 100 878067-30 30-1/2” 100 878067-30.5 31” 100 878067-31 31-1/2” 100 878067-31.5 32” 100 878067-32 32-1/2” 100 878067-32.5 33” 100 878067-33 Gun Drilled Axles • Made from certified Hy-Tuff material • Heat treated and CNC machined true • Fits most Quick Change and Ford 9” floaters • 31-1/2” Long gun drilled axle weighs 7.60 pounds • Approximately 2-1/2 pounds in weight savings from solid axles Length Part # 28-1/2” 100 878067G-28.5 29-1/2” 100 878067G-29.5 30” 100 878067G-30 30-1/2” 100 878067G-30.5 31” 100 878067G-31 31-1/2” 100 878067G-31.5 32” 100 878067G-32 32-1/2” 100 878067G-32.5 33” 100 878067G-33 33-1/2” 100 878067G-33.5 34” 100 878067G-34 Length Part # 33-1/2” 100 878067-33.5 34” 100 878067-34 34-1/2” 100 878067-34.5 35” 100 878067-35 35-1/2” 100 878067-35.5 36” 100 878067-36 36-1/2” 100 878067-36.5 Length Part # 34-1/2” 100 878067G-34.5 35” 100 878067G-35 35-1/2” 100 878067G-35.5 36” 100 878067G-36 36-1/2” 100 878067G-36.5 37” 100 878067G-37 37-1/2” 100 878067G-37.5 38” 100 878067G-38 39” 100 878067G-39 39-1/2” 100 878067G-39.5 40” 100 878067G-40 A. Stock Style Flanged Axle Assembly • Kit includes retainer, A20 type bearing & lock collar • A20 bearing is tapered and includes race, seal & sleeve all in one • Has all 3-bolt patterns: 5 x 4.5”, 5 x 4.75”, & 5x5” • Drilled for 5/8” press in wheel studs • Splined end extra long (cut to fit) 28” Splined Flanged Axle Kit 100 8780-28 31” Splined Flanged Axle Kit 100 8780-31 B. Replacement Bearing/Race/Seal/Sleeve Bearing/Race/Seal/Sleeve, (A20) C. Rotor Hat • Lightweight stamped steel, Fits 4.5”, 4.75” or 5” bolt circle, 3” Offset 100 8780-BS Stamped Steel Rotor Hat 100 365 A B C D E A E 2-1/2” Spline A 31 Spline 24 Spline 3/8” 3/4” SOLID AXLES HOW TO POSITION AXLE BY USING 3/8” S.A.E. FINE THREADED BOLTS 1/8” TO 3-16” 1-1/4” Use grade 8 (minimum) bolt with jam nut. Install into opposing ends of axles and adjust for 1/8” - 3/16” total clearance with both axle retaining plates installed. 5.935” 3.066” B B C D F 1.564” (Bearing I.D.) 3.149” (Bearing O.D.) Included In Assembly: G 2-1/2” Spline Gun drilled on this end from top of spline to end of spline 31 Spline 24 Spline 3/8” 3/4” GUN DRILLED AXLES Drilled from spline end to within 2-1/2” of opposite end to maintain strength of the axle. Less chance of axle twist or fatigue break than a fully drilled axle. Gun drilled axles are used to reduce rotating weight. Our axles use Hy-Tuff steel, designed to withstand severe and high torque conditions. 33” Long C 9-1/4” Spline 1-1/4” BRAKES 138 KeyserManufacturing.com Some parts may contain chemicals known in the state of California or other states with similar laws to cause cancer or reproductive harm.
A-E. Spindle and Axle Snouts • 100 8521 Is most commonly used on all wide 5 spindles • 100 8522 Is most commonly used on rear wide 5 axle tubes • 100 8523 Fits Port City Racing, Howe, Vogel and Coleman hubs • 100 8524 Fits Coleman, rear IMCA/Sportsman hubs • 100 8525 Fits Port City Racing economy hub, ACE, Afco, and Winters A. Wide 5” Front Spindle Snout 100 8521 B. Wide 5” - Rear Tube Snout 100 8522 C. PCR 5” x 5” - Rear Tube Snout 100 8523 D. Mini 5” - Rear Tube Snout 100 8524 E. Grand National 5” x 5” Rear Tube Snout 100 8525 A DRIVELINE 1.812” 2.00” 2.375” B Axle Tube Accessories 1.812” 2.00” 2.375” C 2.00” 2.00” 2.375” 2.375” 2.625” 2.625” 2.619” 2.619” D 1.812” 2.00” 2.375” E 2.50” 2.50” 2.970” ENGINE FITTINGS FUEL/AIR FILTERS COOLING/ TANKS A-B. Axle Snout Seals A. Floating Axle Seal 008 7271 B. GN Tapered Floating Axle Seal 100 20408 A B DEGREASERS & CLEANERS ELECTRICAL/ GAUGES A-C. Lock Up Plug and Axle Plugs LOCK UP PLUG: • 31 Spline • 1-3/8” long • Includes allen bolt • Use to lengthen axle and “lock up” differential AXLE PLUGS: • Threads into gun drilled axle • Keeps rear end lube out of axles A. Lock Up Plug 100 8501 B. Axle Plug - Aluminum 100 8502 C. Axle Plug - Steel 100 8502-S A B C DRIVELINE CHASSIS/ CONSTRUCTION BODY COMPONENTS Winters 2” 8 Bolt 5 X 5 Steel Pin • All 5x5-2” pins have a sleeve and o-ring included with pin • Specify if going into aluminum or steel tubes 0˚ Straight* (Shown) 008 1384 1/2˚ Cambered* 008 1384-05 1˚ Cambered* 008 1384-10 1-1/2˚ Cambered* 008 1384-15 2˚ Cambered* 008 1384-20 A-B. 8 Bolt Pin Replacement Parts A B Winters 8 Bolt Wide 5 Heat Treated Steel Pin • Sleeve and o-ring not used on W-5 straight pin 0˚ Straight (Shown) 008 6620HT 1/2˚ Cambered* 008 6620C-05 1˚ Cambered* 008 6620C-10HT 1-1/2˚ Cambered* 008 6620C-15HT Bolt-On Snout Spacer • 1/4” Spacer bolts between your 8 bolt spindle pin and axle tube to widen your track width TOOLS SAFETY STEERING FRONT SUSPENSION A. Cambered 8 Bolt Spindle O-Ring 008 7464 B. Cambered 8 Bolt Sleeve W-5 008 6993 Assembled 1/4” Bolt-On Snout Spacer 100 4080 REAR SUSPENSION HUBS & WHEELS WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov 800-472-2464 139 BRAKES
Page 1 and 2:
2024 CATALOG Call Today 1-800-472-2
Page 3 and 4:
TOLL FREE 800-472-2464 KeyserManufa
Page 5 and 6:
TURRET STAMPING We have experience
Page 7 and 8:
QUARTER MIDGET 751 & 752 SERIES •
Page 9 and 10:
Stroke Stroke Extended Compressed 7
Page 11 and 12:
Piston Options Optional Pistons 3 P
Page 13 and 14:
Page 15 and 16:
Double Adjustable Single Adjustable
Page 17 and 18:
Independent High Speed Compression
Page 19 and 20:
Page 21 and 22:
Piston Options Optional Digressive
Page 23 and 24:
Steel and Aluminum BVIDA Shock Part
Page 25 and 26:
Page 27 and 28:
Piston Options Optional Digressive
Page 29 and 30:
Page 31 and 32:
Page 33 and 34:
Non-Adjustable Stroke Stroke Extend
Page 35 and 36:
Page 37 and 38:
PISTONS .406 ID Piston Options •
Page 39 and 40:
SPRINGS STANDARD COIL-OVER SPRINGS
Page 41 and 42:
TWO-STAGE STACK SPRING Spring Slide
Page 43 and 44:
a 7/16” ID - fits Integra 4400 se
Page 45 and 46:
SHOCK TOOLS Shock Vise • All-in-o
Page 47 and 48:
SHOCK TOOLS Thread Chaser • Use f
Page 49 and 50:
SETUP TOOLS WHEEL LOAD INDICATOR
Page 51 and 52:
MACHINES STANDARD TIRE PREP MOTOR A
Page 53 and 54:
TIRE WASH STAND • Tire Wash Stand
Page 55 and 56:
ACCESSORIES 2x2 Receiver Mount For
Page 57 and 58:
Drag Racing Tire Treatment • Drag
Page 59 and 60:
FUEL, OIL & ADDITIVES Find Us On TF
Page 61 and 62:
Find Us On Yamaha Greaseable ATV St
Page 63 and 64:
Front Spindle Assembly Steering Whe
Page 65 and 66:
Standard Steel Rear Motor Mounts
Page 67 and 68:
Easy mounting with 4 pre-drilled ho
Page 69 and 70:
Muffler Turn Down • Designed to d
Page 71 and 72:
A. SBC - Conventional Crossover Hea
Page 73 and 74:
ENGINE Valve Covers Gaskets, Breath
Page 75 and 76:
Aluminum Port Fitting A B (Port) Pa
Page 77 and 78:
Manufacturing Co. Inline Oil Filter
Page 79 and 80:
A. Gilmer Lightweight Oil Pump Pull
Page 81 and 82:
A-E. Set A - 30% Reduction, Double
Page 83 and 84:
SBC Crate Engine Kit Without Steeri
Page 85 and 86:
ENGINE Engine Oil Additives ENGINE
Page 87 and 88:
A-E. AN Fitting Wrenches • Sturdy
Page 89 and 90: Aluminum AN Pipe Adapters “A”
Page 91 and 92: Straight FITTINGS Aluminum Fittings
Page 93 and 94: Carries fluids of all kinds without
Page 95 and 96: FITTINGS Brakeline Hose & Fittings
Page 97 and 98: 1” Governor Plate • Restricts a
Page 99 and 100: Power Valves • The power valve al
Page 101 and 102: Quick Fill Dump Can • Aluminum qu
Page 103 and 104: • Reusable Foam Filter Shield •
Page 105 and 106: A-E. Long Fuel Filters • These fi
Page 107 and 108: COOLING/TANKS ENGINE FITTINGS FUEL/
Page 109 and 110: 3 COOLING/TANKS CHEVY RADIATORS 2 1
Page 111 and 112: ROUSH YATES RADIATORS 3 4 5 2 1 COO
Page 113 and 114: A-D. Wire Screen • Stainless stee
Page 115 and 116: Roll Bar Mount Expansion Tank • B
Page 117 and 118: Carbon Resin GM Style 4 Blade Fan
Page 119 and 120: Clamp-On Heat Shield Kit • Blocks
Page 121 and 122: DEGREASERS/CLEANERS Maxima SC1 Clea
Page 123 and 124: ELECTRICAL/GAUGES A. Mini Brake Bal
Page 125 and 126: ELECTRICAL/GAUGES Weatherproof Pane
Page 127 and 128: ELECTRICAL/GAUGES A-B. Battery Cabl
Page 129 and 130: MSD 7AL Pro Series Ignition • Red
Page 131 and 132: ELECTRICAL/GAUGES MSD Ignition Coil
Page 133 and 134: ELECTRICAL/GAUGES Autolite Spark Pl
Page 135 and 136: We can do that! DRIVELINE Ts TECH S
Page 137 and 138: 5-1/2” Yoke - Jericot/T-10 - 31 S
Page 139: Axle Tube Weight Clamp • Securely
Page 143 and 144: A-B. Standard Quick Change Locker
Page 145 and 146: Professional Series • Black oxide
Page 147 and 148: A-B. Magnesium Side Bells A. Right
Page 149 and 150: SPRINT QUICK CHANGE PARTS (STANDARD
Page 151 and 152: A-B. Black Aluminum Shifter Kits
Page 153 and 154: Brinn Standard Transmission • Alu
Page 155 and 156: Magnesium Bellhousings • Can be u
Page 157 and 158: A. 99T 5.5” MAGNESIUM ULTRA Bellh
Page 159 and 160: A. Optimum V-Drive 5.5 Reverse Moun
Page 161 and 162: Clutch Packs - Pro Series, V-Drive,
Page 163 and 164: CHASSIS/CONSTRUCTION 1. Finished! 2
Page 165 and 166: CHASSIS/CONSTRUCTION A-J. Body/ Tri
Page 167 and 168: CHASSIS/CONSTRUCTION Steel Threaded
Page 169 and 170: CHASSIS/CONSTRUCTION Rack Plate •
Page 171 and 172: CHASSIS/CONSTRUCTION Ballast & Clam
Page 173 and 174: 16” BODY COMPONENTS MODIFIED SPOI
Page 175 and 176: BODY COMPONENTS Body Brace Straps
Page 177 and 178: t A-D. 1/2” X 4” Aluminum 2 Pin
Page 179 and 180: BODY COMPONENTS A-B. Panel Plates
Page 181 and 182: • Many uses include mounting roof
Page 183 and 184: BODY COMPONENTS Rolled Plastic •
Page 185 and 186: BODY COMPONENTS MD3 Rocker Panels
Page 187 and 188: Plastic MD3 Dirt Style Noses • Hi
Page 189 and 190: Nose ID BODY COMPONENTS Bumper Cove
Page 191 and 192:
A-D. Windshield Cowl BODY COMPONENT
Page 193 and 194:
BODY COMPONENTS Street Stock Noses
Page 195 and 196:
Safety Wire • Safety Wire is wide
Page 197 and 198:
Data Engineering System • Record
Page 199 and 200:
Tire Siper/Groover Depth Gauge •
Page 201 and 202:
STD. Tire Wrap Attachment • For u
Page 203 and 204:
Paint Tire Markers • Permanent, d
Page 205 and 206:
A-C. Fuel Funnel with Pre-Filter
Page 207 and 208:
Engine Stand • Sturdy steel const
Page 209 and 210:
5 Point Bolt-In Belt Harness Set
Page 211 and 212:
Foam Roll Bar Padding - 3 Foot Stic
Page 213 and 214:
Fire Bottle Clamps • 5# Bottle cl
Page 215 and 216:
Advantage Forced Air Dryer with Fan
Page 217 and 218:
A-B. Small Spline Pitman Arms • 1
Page 219 and 220:
Camaro Adjustable Center Link • R
Page 221 and 222:
Oversize Heims • Fits 3/4” stee
Page 223 and 224:
Pavement Late Model Slotted Eye •
Page 225 and 226:
A-B. Standard Servo For Remote Serv
Page 227 and 228:
Optional Power Steering Pump Adapte
Page 229 and 230:
A-C. KSE Belt Drive Tandem X Pump
Page 231 and 232:
A. Teflon - Lined Power Steering Ho
Page 233 and 234:
We can do that! FRONT SUSPENSION We
Page 235 and 236:
FRONT SUSPENSION Camaro 4 Bolt Uppe
Page 237 and 238:
A-Frame Mounting Bracket FRONT SUSP
Page 239 and 240:
FRONT SUSPENSION 15-5/8” Nova Sty
Page 241 and 242:
100 2723 1.27” Diameter - 1.50 Le
Page 243 and 244:
FRONT SUSPENSION LOWER BILLET SHOCK
Page 245 and 246:
FRONT SUSPENSION A-B. Screw-In Uppe
Page 247 and 248:
FRONT SUSPENSION A-E. Howe Screw-In
Page 249 and 250:
FRONT SUSPENSION 2° 2° 2° It All
Page 251 and 252:
FRONT SUSPENSION A. Pinto/Mustang I
Page 253 and 254:
A-C. Alum. Wedge Bolt Assembly •
Page 255 and 256:
A-B. Adjusters Splined Sway Bars
Page 257 and 258:
FRONT SUSPENSION Aluminum Splined T
Page 259 and 260:
Aurora, 2- Piece, Steel, Male, Gene
Page 261 and 262:
Adjustable Panhard Drop Mount 100 6
Page 263 and 264:
REAR SUSPENSION A-E. Aluminum Doubl
Page 265 and 266:
11-1/2” Hoop Panhard Bars • Pro
Page 267 and 268:
Left Hand 45° Steel Birdcage • 1
Page 269 and 270:
A-B. Aluminum Trailing Arm Brackets
Page 271 and 272:
Aluminum Splined Tubes • Raised s
Page 273 and 274:
Aurora, 2- Piece, Steel, Male, Gene
Page 275 and 276:
A. Spring Loaded Torque Absorber
Page 277 and 278:
A-F. 3-3/8” O.D. X 2-1/2” Tall
Page 279 and 280:
1 Piece Front Hub Kit • Front hub
Page 281 and 282:
A-B. Grand National Rear Hub Kit
Page 283 and 284:
Wilwood Drive Flange - O-Ring Mount
Page 285 and 286:
A-C. 5x5 (2”) Timken Bearing Kits
Page 287 and 288:
Coarse Thread Wheel Studs 5/8” X
Page 289 and 290:
• 1/2” Steel Wheel Spacer Weigh
Page 291 and 292:
15x8 Bassett D-Hole IMCA Wheel •
Page 293 and 294:
3/16” Steel Pre-Made Brakelines
Page 295 and 296:
A-D. Flange Style Banjo Bolts W/ Wa
Page 297 and 298:
3” ASA Single Inlet • Fits shor
Page 299 and 300:
Standard GM Caliper Bracket Rear GM
Page 301 and 302:
Cast Iron GM Metric 1978 and Later,
Page 303 and 304:
A-J. AP Racing Brake Calipers Repla
Page 305 and 306:
AP Directional Rotors • J-Hook De
Page 307 and 308:
BRAKES Wilwood Pad Compound Guide C
Page 309 and 310:
D-154 Metric GM Set 6.00 Inner Pad
Page 311 and 312:
Tilton 74 Series Universal Master C
Page 313 and 314:
Castrol SRF • Exceptionally high
Page 315 and 316:
A. Floor Mount Pedals • Aluminum
Page 317 and 318:
PARTS INDEX Exhaust................
Page 319 and 320:
PARTS INDEX Tether - Spindle / Hood
Page 321 and 322:
We can do that! Ts TECH SHEET: Rear
Page 323 and 324:
SHOCK REPAIR REQUEST NAME: ACCOUNT
show all

2024 Catalog

Create successful ePaper yourself

Delete template?

Save as template?