2024 Catalog

ENGINE
Find Us On
FITTINGS
FUEL/AIR
FILTERS
Oil Pans, Preheaters, & Accessories
A. SB Chevy Claimer Circle Track Pan
• 7” Deep
• 2 Swinging trap doors
• Unpainted
Pan Only With Left Hand Dipstick 100 68841
Pan Only With Right Hand Dipstick 100 68843
A
B
COOLING/
TANKS
DEGREASERS
& CLEANERS
B. Oil Pump Pick Up
High Volume Oil Pump Pick Up 100 68845
A-B. Fel-Pro Oil Pan Gasket
• Includes front and rear seals
A
B
ELECTRICAL/
GAUGES
One Piece Design
DRIVELINE
CHASSIS/
CONSTRUCTION
BODY
COMPONENTS
TOOLS
A. 75-79 LH Dipstick SBC, Thick Front Seal, 3/32” Thick 221 1803
B. SBC, 1 Piece with Anti-Stick Treatment 221 OS34510T
Wet Sump Oil Pumps
• Designed to accommodate consistent oil pressure and volume requirements for today’s
racing engine
• Anti-cavitation slots are machined to bleed oil back to the inlet side of the pump and an
enlarged bypass area ensure a smooth flow rate
Oil Pump Shaft (Fits SBC & 90˚ Chevy) 085 22070
Oil Restrictor Kits
• Screws into existing lifter gallery cleaning plug holes at back of block
SB & BB Chevy Engines, .0625” Hole Diameter (2 Pk.) 085 22010
A-B. Internal Oil Heating
• 212 watts of power raises temperature of 12 quarts of oil 60°F in about 30 minutes
• Element screws into place; available with aluminum or steel 1” NPT fitting
• Use for pre-heating of oil pans, tanks and automatic transmission pans
A
A. Oil Preheater, Internal, W/Alum. Fitting 085 23980
B. Cord Only For 085 23980 085 23980200
B
STEERING
FRONT
SUSPENSION
REAR
SUSPENSION
HUBS &
WHEELS
SAFETY
A-B. Oil Preheaters
• Immersion style does a great job of pre-heating your oil. It requires welding a bung into
the tank. Comes complete with both steel and aluminum 1/2” NPT weld bung
• Wrap around styles can be glued to the outside of the tank or pan.
• Comes with detachable cord set
A. 300 WATT Immersion Style Heater 086 08-0300
Replacement Cord For 086 08-0300 086 08-0310
B. 300 WATT Wrap Around Pad 2” x 15” 086 08-0301
400 WATT Wrap Around Pad 4” x 10” 086 08-0302
A-C. External Oil Heating Pads
• Etched foil design distributes heat evenly
• Silicone outer shell resists oil and dirt
• Excellent for preheating of oil pans, tanks, and automatic transmission pans
A. 6” x 12”, Hook and Spring, 360 Watts, 8” 110 Volt Cord 085 23995
B. 5” x 7”, Self-Adhesive, 400 Watts (Min.), 36” 110 Volt Cord 085 23996
C. 2” x 15”, Self-Adhesive, 150 Watts, 36” 110 Volt Cord 085 23997
A
A
C
B
B
BRAKES
72
KeyserManufacturing.com
Some parts may contain chemicals
known in the state of California or other
states with similar laws to cause cancer
or reproductive harm.