2024 Catalog

ENGINE
Find Us On
FITTINGS
FUEL/AIR
FILTERS
COOLING/
TANKS
DEGREASERS
& CLEANERS
ELECTRICAL/
GAUGES
DRIVELINE
CHASSIS/
CONSTRUCTION
BODY
COMPONENTS
TOOLS
SAFETY
STEERING
FRONT
SUSPENSION
REAR
SUSPENSION
HUBS &
WHEELS
Set-Up Tools
Longacre
Toe-In Gauge
• Measure the toe-in within 1/32”
Toe-In Gauge 071 79620
Longacre Billet Tire Scribe
• Use to make a true running line on the face of the tire for toe-in setting
• Spring loaded for one person use
Tire Scribe 071 79610
Toe Gauge
• Easily adjustable
for all tread widths
• Makes adjusting
toe-in a one
person job
Toe in Gauge 100 7404
Longacre Toe-In Plates
with Magnets
• Formed Aluminum rigid design for accuracy
• Kick Out on Bottom holds plate
flat against the wheel
• Magnets holds the tapes in place while you work
• Tapes are Included Set includes 3/4” tapes with 1/32” increments
Toe-In Plates w/ Magnets (Pair) 071 79501
Caster/Camber Gauge
• Reads camber +6° to -6°, accurate to 1/4°
• Reads caster from +12° to -4° in 1/2° increments
• Separate bubbles for positive and negative camber
• All vials are individually checked for accuracy
& assembled on a precision fixture
• Comes with silver carrying case, includes adapter
Gauge With Magnetic Adapter W/Case 071 78260
Gauge W/ Wide 5 Adapter (1-13/16” - 16) W/Case 071 78264
Billet Caster/Camber
Gauge - NO ADAPTER
• Reads camber +9° to -9°, accurate to 1/4°
• Reads caster from +12° to -4° in 1/2° increments
• Separate bubbles for positive and negative camber
• Glow-in-the-dark vials are easier to read even in good light
• Comes with silver carrying case
• DOES NOT INCLUDE ADAPTER
Camber Gauge w/o Magnetic Adapter W/Case 071 78273
Bump Steer Gauge
• NEW extended height design - check
bump steer at ride height or on stands
• Includes NEW 3/8” thick billet wheel plate with
mounting holes for most 5 bolt patterns (4-1/2” - 5”)
and most wide 5 plus 4, 5 & 8 bolt drive flanges,
adjustable stand and precision dial indicator
• Center hole is 3 1/4”
5 Bolt/Wide 5 Plate 071 79005
Toe Plate Gauge
These are not designed to hold the weight of your race car!
• For use with jack stands and our Ride Height Struts (see page 195)
to measure toe at simulated ride height
• These plates bolt to the hub instead of the wheel for a true measurement
• Sold in Pairs
• Made out of 1/4” aluminum or steel
• Powder coated flat black
Aluminum
Toe in Gauge - Wide 5 - Aluminum 100 7408
Toe in Gauge - 5X5/5X4.75 - Aluminum
100 7409A
Toe in Gauge - 5X5/5X4.75 - Steel
100 7409S
Billet Caster/Camber Gauge
• Reads camber +9° to -9°, accurate to 1/4°
• Reads caster from +12° to -4° in 1/2° increments
• Separate bubbles for positive and negative camber
• Glow-in-the-dark vials are easier
to read even in good light
• Comes with silver carrying case, includes adapter
Camber Gauge w/ Magnetic Adapter W/Case 071 78272
A-D. Caster/Camber Separate Adapters
A B - C
A. Wide 5 or 5 on 5 Spindle Adptr. (1-13/16”- 16) 071 78405
B. Factory GM Adapter (3/4” - 20) 071 78410
C. Ford Pinto Adapter (3/4” - 16) 071 78414
D. Billet Magnetic Caster Camber Gauge Adapter 071 78424
Snap In Bump Steer Retro-Fit Kit
• Retro-fit kit to Wilwood Starlite hubs
Retro-fit Kit to Wilwood Starlite Hubs 071 79121
Infrared Laser Pyrometer
• Instant response, non-contact temps Back lights for night use
• Farenheit or Celcius Laser sighting accuracy
• Holds reading longer for easier use Measures to 600˚ F
Steel
600˚ Infrared Laser Pyrometer 071 50612
D
BRAKES
196
KeyserManufacturing.com
Some parts may contain chemicals
known in the state of California or other
states with similar laws to cause cancer
or reproductive harm.