2024 Catalog

A-E. Set A - 30% Reduction, Double Groove
A B C D E
A. Upper Pulley 5/8” Bore (2 lbs.) 080 DS-362
B. Upper Pulley 3/4” Bore (2 lbs.) 080 DS-362-3
C. Lower Pulley (2 lbs.), A=.525 080 DS-363
D. Lower Pulley Alum. Pump (2 lbs.), A=.712 080 DS-363-XL
E. Lower Pulley GM Pump (2 lbs.), A=1.837 080 DS-363-700
A-B. Set C - 15% Reduction, Double Groove
A
B
2.266
7.00”
2.911
5-7/8”
“A”
A-B. Set D - 1:1 Ratio, Double Groove
A
B
ENGINE
V-Belt Pulleys
2.142
7-3/4”
5.7/8”
2.8
“B”
“C”
5-9/16”
SET A DIMENSIONS:
5-7/8”
“A”
“A”
ENGINE FITTINGS FUEL/AIR
FILTERS
COOLING/
TANKS
DEGREASERS
& CLEANERS
ELECTRICAL/
GAUGES
SET C DIMENSIONS:
A. Upper Pulley 5/8” Bore (2 lbs.) 080 DS-365
B. Lower Pulley (2 lbs.) A=.454 080 DS-364
Lower Pulley Spacer
• Spaces lower pulley out to matchup with upper pulley
Lower Pulley Spacer, .090 Thick
080 DS-364-90
A. Upper Pulley 5/8” Bore (2 lbs.) B=2.911, C=2.266 080 DS-380
B. Lower Pulley (2 lbs.), A=.454 080 DS-364
Lower Pulley Boss
• Fits between pulley and harmonic balancer to
ensure proper pulley alignment with balancer
Lower Pulley Boss
080 DS-364-B
SET D DIMENSIONS:
DRIVELINE CHASSIS/
CONSTRUCTION
BODY
COMPONENTS
Single Groove Lightweight Aluminum
• Single groove V-belt pulleys are 3-1/4” and
fit GM and Ford with 21/32” shafts
• Deep groove helps retain V-belt at high rpms
• This 5” outer diameter lightweight
aluminum pulley uses 36º x 17/32” belt
Alternator Pulley 085 64800
Hardcoat Anodized Billet Aluminum
• The billet aluminum pulleys are both 5” in outer diameter
and fit a 1/2” wide x 36º belt, and are hard coat anodized
• Fits 21/32” diameter shaft
Billet, Anodized Alternator
Pulley For GM, Ford
Alternator Pulleys
085 64870
TOOLS SAFETY STEERING FRONT
SUSPENSION
REAR
SUSPENSION
HUBS &
WHEELS
WARNING:
Cancer and Reproductive Harm
www.P65Warnings.ca.gov
800-472-2464
79
BRAKES